Yu Zhao

50 papers C 1Journal 43Unranked 6
YearRankTypeTitle / Venue / Authors
2026 J jnl
Joint Optimization of Condition-Based Postponed Replacement-Spare Control Policy with Adaptive Imperfect Inspection for Three-State System.
Qual. Reliab. Eng. Int.
Jiantai Wang, Xiaobing Ma, Fanping Wei, Yuhan Ma, Runyu Zhang, Yu Zhao, Li Yang
2025 — conf
A Collaborative Replacement-Spare Provision Policy for Three-State System Considering Inspection Errors.
ISSSR
Jiantai Wang, Yu Zhao, Xiaobing Ma, Li Yang
2025 J jnl
A State-Age-Dependent Maintenance-Spare Control Strategy Under Inspection Error Compensation.
IEEE Trans. Reliab.
Jiantai Wang, Yu Zhao, Xiaobing Ma, Hui Xiao, Yuhan Ma, Rui Peng, Li Yang
2025 J jnl
Accelerated Degradation Data Analysis Based on Gamma Process With Random Effects.
Qual. Reliab. Eng. Int.
Huiling Zheng, Jun Yang, Wenda Kang, Yu Zhao
2025 J jnl
Adaptive Accelerated Degradation Test Design for Tweedie Exponential Dispersion Process With Random Effects Based on the Predictive Remaining Useful Life.
IEEE Trans. Reliab.
Huiling Zheng, Jun Yang, Wenda Kang, Yu Zhao
2024 J jnl
Condition-based maintenance management for two-stage continuous deterioration with two-dimensional inspection errors.
Qual. Reliab. Eng. Int.
Jiantai Wang, Xiaobing Ma, Kaiye Gao, Yu Zhao, Li Yang
2023 — conf
Jointly Optimizing Production, Quality Inspection and Maintenance Policies for an Unreliable Production System.
IEEM
Qi Li, Jun Yang, Ning Wang, Hao Xing, Yu Zhao
2023 J jnl
Reliability acceptance sampling plan for degraded products subject to Wiener process with unit heterogeneity.
Reliab. Eng. Syst. Saf.
Huiling Zheng, Jun Yang, Houbao Xu, Yu Zhao
2023 J jnl
Reliability demonstration test plan for degraded products subject to Gamma process with unit heterogeneity.
Reliab. Eng. Syst. Saf.
Huiling Zheng, Jun Yang, Yu Zhao
2022 J jnl
Generally weighted moving average control chart for monitoring two-parameter exponential distribution with measurement errors.
Comput. Ind. Eng.
Qi Li, Jun Yang, Shuo Huang, Yu Zhao
2022 — conf
Reliability Modeling and Rework Strategy Evaluation of Manufacturing System based on Stochastic-flow Network.
IEEM
Qinglin Zheng, Weiwei Duan, Wei Dai, Yu Zhao
2020 J jnl
Dynamic maintenance strategy with iteratively updated group information.
Reliab. Eng. Syst. Saf.
Tianyi Wu, Li Yang, Xiaobing Ma, Zihan Zhang, Yu Zhao
2020 J jnl
Reliability Evaluation for Manufacturing System Based on Dynamic Adaptive Fuzzy Reasoning Petri Net.
IEEE Access
Lixiang Wang, Wei Dai, Jun Ai, Weiwei Duan, Yu Zhao
2020 J jnl
Reliability modeling methods for load-sharing
Reliab. Eng. Syst. Saf.
Jianchun Zhang, Yu Zhao, Xiaobing Ma
2020 J jnl
Risk Evaluation for a Manufacturing Process Based on a Directed Weighted Network.
Entropy
Lixiang Wang, Wei Dai, Dongmei Sun, Yu Zhao
2019 J jnl
A Novel Approach to Support Failure Mode, Effects, and Criticality Analysis Based on Complex Networks.
Entropy
Lixiang Wang, Wei Dai, Guixiu Luo, Yu Zhao
2019 J jnl
A new reliability analysis method for load-sharing
Reliab. Eng. Syst. Saf.
Jianchun Zhang, Yu Zhao, Xiaobing Ma
2019 J jnl
A novel pseudo-maximum likelihood estimation method for accelerated degradation tests under Wiener process.
Qual. Reliab. Eng. Int.
Han Wang, Yu Zhao, Xiaobing Ma, Zhihua Wang
2019 — conf
Research on the Propagation of Defects in Assembly Process Based on SIR Epidemic Model.
ICPHM
Mengyao Wu, Wei Dai, Yu Zhao
2019 J jnl
The Analysis of Defect Emergence in Assembly Process Based on the Discrete-Time SIRS Model.
IEEE Access
Mengyao Wu, Wei Dai, Yubing Huang, Yu Zhao
2019 J jnl
The Method for Risk Evaluation in Assembly Process based on the Discrete-Time SIRS Epidemic Model and Information Entropy.
Entropy
Mengyao Wu, Wei Dai, Zhiyuan Lu, Yu Zhao, Meiqing Wang
2018 — conf
A Multi-objective Framework for Designing Accelerated Degradation Tests Under Wiener Process Model.
IEEM
Han Wang, Yu Zhao, Xiaobing Ma
2018 J jnl
An Extended Model for Fatigue Life Prediction and Acceleration Considering Load Frequency Effect.
IEEE Access
Yikun Cai, Yu Zhao, Xiaobing Ma, Zhenyu Yang, Ying Ding
2018 J jnl
Hybrid preventive maintenance of competing failures under random environment.
Reliab. Eng. Syst. Saf.
Li Yang, Yu Zhao, Rui Peng, Xiaobing Ma
2018 J jnl
Mechanism Equivalence in Designing Optimum Step-Stress Accelerated Degradation Test Plan Under Wiener Process.
IEEE Access
Han Wang, Yu Zhao, Xiaobing Ma
2018 J jnl
Multi-level maintenance strategy of deteriorating systems subject to two-stage inspection.
Comput. Ind. Eng.
Li Yang, Yu Zhao, Xiaobing Ma
2018 J jnl
Remaining Useful Life Prediction Using a Novel Two-Stage Wiener Process With Stage Correlation.
IEEE Access
Hongyu Wang, Yu Zhao, Xiaobing Ma
2018 J jnl
Screening Scheme Evaluation of the Assembly Process Based on the Stress-Strength Model and Defect Stream Analysis.
Entropy
Yubing Huang, Wei Dai, Lianxi Liu, Yu Zhao
2018 — conf
Time-dependent Reliability Modelling Method Based on Load-strength Model in the Presence of Environmental Effects.
IEEM
Jianchun Zhang, Yu Zhao, Xiaobing Ma
2018 J jnl
Uncertainty Evaluation in Multistage Assembly Process Based on Enhanced OOPN.
Entropy
Yubing Huang, Wei Dai, Weiping Mou, Yu Zhao
2017 J jnl
A Stress-Strength Time-Varying Correlation Interference Model for Structural Reliability Analysis Using Copulas.
IEEE Trans. Reliab.
Jianchun Zhang, Xiaobing Ma, Yu Zhao
2017 J jnl
A condition-based maintenance model for a three-state system subject to degradation and environmental shocks.
Comput. Ind. Eng.
Li Yang, Xiaobing Ma, Yu Zhao
2017 J jnl
A preventive maintenance policy based on dependent two-stage deterioration and external shocks.
Reliab. Eng. Syst. Saf.
Li Yang, Xiaobing Ma, Rui Peng, Qingqing Zhai, Yu Zhao
2017 J jnl
An inspection model for a multi-component system subject to 2 types of failures.
Qual. Reliab. Eng. Int.
Li Yang, Yu Zhao, Xiaobing Ma
2017 J jnl
Equivalence analysis of accelerated degradation mechanism based on stochastic degradation models.
Qual. Reliab. Eng. Int.
Han Wang, Yu Zhao, Xiaobing Ma, Li Yang
2017 J jnl
Optimal design of constant-stress accelerated degradation tests using the M-optimality criterion.
Reliab. Eng. Syst. Saf.
Han Wang, Yu Zhao, Xiaobing Ma, Hongyu Wang
2017 J jnl
Reliability Demonstration for Long-Life Products Based on Hardened Testing Method and Gamma Process.
IEEE Access
Jianchun Zhang, Xiaobing Ma, Yu Zhao
2017 J jnl
Reliability evaluation of non-repairable phased-mission common bus systems with common cause failures.
Comput. Ind. Eng.
Huan Yu, Jun Yang, Jing Lin, Yu Zhao
2016 J jnl
A delay time model for a mission-based system subject to periodic and random inspection and postponed replacement.
Reliab. Eng. Syst. Saf.
Li Yang, Xiaobing Ma, Qingqing Zhai, Yu Zhao
2016 J jnl
Degradation-shock-based Reliability Models for Fault-tolerant Systems.
Qual. Reliab. Eng. Int.
Zhenyu Liu, Xiaobing Ma, Lijuan Shen, Yu Zhao
2016 J jnl
Measurement errors in degradation-based burn-in.
Reliab. Eng. Syst. Saf.
Qingqing Zhai, Zhi-Sheng Ye, Jun Yang, Yu Zhao
2016 J jnl
Reliability evaluation of linear multi-state consecutively-connected systems constrained by m consecutive and n total gaps.
Reliab. Eng. Syst. Saf.
Huan Yu, Jun Yang, Rui Peng, Yu Zhao
2015 J jnl
A Study of Optimal Component Order in a General 1-Out-of-n Warm Standby System.
IEEE Trans. Reliab.
Qingqing Zhai, Jun Yang, Rui Peng, Yu Zhao
2015 J jnl
An Adjustment to the Bartlett's Test for Small Sample Size.
Commun. Stat. Simul. Comput.
Xiaobing Ma, Feng-Chun Lin, Yu Zhao
2015 J jnl
Reliability modelling and verification of manufacturing processes based on process knowledge management.
Int. J. Comput. Integr. Manuf.
Wei Dai, Paul G. Maropoulos, Yu Zhao
2015 C conf
Research on multi-stage manufacturing process reliability improvement.
INDIN
Xiaonan Wu, Wei Dai, Yu Zhao, Fen Kuang, Guixiu Luo
2014 J jnl
Generalized moment-independent importance measures based on Minkowski distance.
Eur. J. Oper. Res.
Qingqing Zhai, Jun Yang, Min Xie, Yu Zhao
2014 J jnl
Space-partition method for the variance-based sensitivity analysis: Optimal partition scheme and comparative study.
Reliab. Eng. Syst. Saf.
Qingqing Zhai, Jun Yang, Yu Zhao
2013 J jnl
Simultaneous Optimization of Robust Parameter and Tolerance Design Based on Generalized Linear Models.
Qual. Reliab. Eng. Int.
Lijuan Shen, Jun Yang, Yu Zhao
2011 J jnl
An integration design optimization framework of robust design, axiomatic design, and reliability-based design.
Qual. Reliab. Eng. Int.
Lijuan Shen, Jun Yang, Yu Zhao