Seongbo Shim

28 papers A* 1A 5C 3Journal 14Unranked 5
YearRankTypeTitle / Venue / Authors
2026 J jnl
Robotic System With Stewart Platform and RCM Mechanism for Enhanced Precision and Safety in Non-Invasive Brain Stimulation.
IEEE Trans. Biomed. Eng.
Seongbo Shim, Hyo-Jeong Cha, Subin Joo, Haejune Park, Deokgi Jeung, Joonho Seo
2025 J jnl
Development of a Compact Optical Tracking System With Motorized Variable Zoom and Rotation for Tracking Range Adjustment in Image-Guided Surgery.
IEEE Access
Deokgi Jeung, Daekeun Ji, Hyunseok Choi, Joonho Seo, Seongbo Shim
2024 J jnl
Robotic system for nasopharyngeal swab sampling based on remote center of motion mechanism.
Int. J. Comput. Assist. Radiol. Surg.
Seongbo Shim, Joonho Seo
2022 J jnl
Lead-Screw-Driven Revolute Joint for Use in the Remote Center of Motion Mechanism.
IEEE Access
Seongbo Shim, Hyo-Jeong Cha, Joonho Seo
2022 J jnl
Wave-Shaped Notched Compliant Joint With High Rigidity.
IEEE Robotics Autom. Lett.
Seunguk Kim, Seongbo Shim, Daekeun Ji, Jaesung Hong
2020 J jnl
Compact Bone Surgery Robot With a High-Resolution and High-Rigidity Remote Center of Motion Mechanism.
IEEE Trans. Biomed. Eng.
Seongbo Shim, Daekeun Ji, Seongpung Lee, Hyunseok Choi, Jaesung Hong
2020 J jnl
Simultaneous Optimization of Patient-Image Registration and Hand-Eye Calibration for Accurate Augmented Reality in Surgery.
IEEE Trans. Biomed. Eng.
Seongpung Lee, Seongbo Shim, Hogun Ha, Hyunki Lee, Jaesung Hong
2019 J jnl
Neural Network Classifier-Based OPC With Imbalanced Training Data.
IEEE Trans. Comput. Aided Des. Integr. Circuits Syst.
Suhyeong Choi, Seongbo Shim, Youngsoo Shin
2019 J jnl
Wire-driven flexible manipulator with constrained spherical joints for minimally invasive surgery.
Int. J. Comput. Assist. Radiol. Surg.
Daekeun Ji, Taehun Kang, Seongbo Shim, Seongpung Lee, Jaesung Hong
2018 J jnl
Electrothermal Analysis With Nonconvective Boundary Conditions.
IEEE Trans. Circuits Syst. II Express Briefs
Suhyeong Choi, Seongbo Shim, Youngsoo Shin
2018 A conf
Trigonometric Ratio-Based Remote Center of Motion Mechanism for Bone Drilling.
IROS
Seongbo Shim, Seongpung Lee, Daekeun Ji, Hyunseok Choi, Jaesung Hong
2017 A conf
Cut mask optimization for multi-patterning directed self-assembly lithography.
DATE
Wachirawit Ponghiran, Seongbo Shim, Youngsoo Shin
2017 J jnl
Fast Verification of Guide-Patterns for Directed Self-Assembly Lithography.
IEEE Trans. Comput. Aided Des. Integr. Circuits Syst.
Seongbo Shim, Youngsoo Shin
2017 J jnl
Lithography Defect Probability and Its Application to Physical Design Optimization.
IEEE Trans. Very Large Scale Integr. Syst.
Seongbo Shim, Woohyun Chung, Youngsoo Shin
2016 J jnl
An all-joint-control master device for single-port laparoscopic surgery robots.
Int. J. Comput. Assist. Radiol. Surg.
Seongbo Shim, Taehun Kang, Daekeun Ji, Hyunseok Choi, Sanghyun Joung, Jaesung Hong
2016 C conf
Crosslink insertion for minimizing OCV clock skew.
ISCAS
Kiwon Yoon, Seongbo Shim, Youngsoo Shin
2016 — conf
Machine learning (ML)-based lithography optimizations.
APCCAS
Seongbo Shim, Suhyeong Choi, Youngsoo Shin
2016 — conf
Mask optimization for directed self-assembly lithography: Inverse DSA and inverse lithography.
ASP-DAC
Seongbo Shim, Youngsoo Shin
2016 — conf
Placement optimization for MP-DSAL compliant layout.
ICICDT
Seongbo Shim, Woohyun Chung, Youngsoo Shin
2016 A* conf
Redundant via insertion for multiple-patterning directed-self-assembly lithography.
DAC
Seongbo Shim, Woohyun Chung, Youngsoo Shin
2016 A conf
Redundant via insertion in directed self-assembly lithography.
DATE
Woohyun Chung, Seongbo Shim, Youngsoo Shin
2015 — conf
A preliminary study on joint to joint control master device for single port laparoscopic surgery robot.
URAI
Seongbo Shim, Taehun Kang, Daekeun Ji, Jaesung Hong
2015 J jnl
An Analytical Approach to Thermal Design and Optimization With a Temperature-Dependent Power Model.
IEEE Trans. Circuits Syst. I Regul. Pap.
Seongbo Shim, Jae Wook Lee, Youngsoo Shin
2015 A conf
Defect Probability of Directed Self-Assembly Lithography: Fast Identification and Post-Placement Optimization.
ICCAD
Seongbo Shim, Woohyun Chung, Youngsoo Shin
2015 A conf
Identifying redundant inter-cell margins and its application to reducing routing congestion.
DATE
Woohyun Chung, Seongbo Shim, Youngsoo Shin
2015 C conf
Physical design and mask optimization for directed self-assembly lithography (DSAL).
VLSI-SoC
Seongbo Shim, Youngsoo Shin
2014 — conf
Lithographic defect aware placement using compact standard Cells without inter-cell margin.
ASP-DAC
Seongbo Shim, Yoojong Lee, Youngsoo Shin
2013 C conf
Analysis and minimization of short-circuit current in mesh clock network.
ICCD
Seongbo Shim, Minyoung Mo, Sangmin Kim, Youngsoo Shin