Roberto D'Amato

40 papers Journal 14Unranked 26

Year	Rank	Type	Title / Venue / Authors
2021	J	`jnl`	Development of a Smart Leg Splint by Using New Sensor Technologies and New Therapy Possibilities. Sensors José María de Agustín del Burgo, Fernando Blaya Haro, Roberto D'Amato, Alonso Blaya San Pedro, Juan Antonio Juanes Méndez
2021	—	`conf`	Operating room & surgeons: Work-Related Musculoskeletal Disorders. TEEM Jaime Solleiro Rodriguez, Juan Antonio Juanes Méndez, Fernando Blaya Haro, Roberto D'Amato
2020	—	`conf`	Analysis Method for The Design and Manufacture of Sports Transtibial Prostheses. TEEM Fernando Blaya Haro, Roberto D'Amato, Alejandro Luján González, Alonso Blaya San Pedro, Silvia Nuere
2020	—	`conf`	Design of an auricular prosthesis for patients with grade III or IV microtia. TEEM Andrés Marcelo Chaquinga Caisaluisa, Fernando Blaya Haro, Roberto D'Amato, Almudena Ochoa Mendoza, Juan Antonio Juanes Méndez
2020	J	`jnl`	Development of a Smart Splint to Monitor Different Parameters during the Treatment Process. Sensors José María de Agustín del Burgo, Fernando Blaya Haro, Roberto D'Amato, Juan Antonio Juanes Méndez
2020	—	`conf`	Ergonomics in surgical environments. TEEM Jaime Solleiro Rodriguez, Juan Antonio Juanes Méndez, Fernando Blaya Haro, Roberto D'Amato, Alessandro Ruggiero, José Antonio Rodríguez Montes
2020	—	`conf`	Finite Element model of an elbow under load, muscle effort analysis when modeled using 1D rod element. TEEM Emilio Lechosa Urquijo, Fernando Blaya Haro, Roberto D'Amato, Juan Antonio Juanes Méndez
2020	—	`conf`	Smart splint for diagnosis during initial stage of treatment. TEEM José María de Agustín del Burgo, Fernando Blaya Haro, Roberto D'Amato, Juan Antonio Juanes Méndez
2019	—	`conf`	1D Finite Element model using rod element applied to muscle behavior simulation. TEEM Emilio Lechosa Urquijo, Roberto D'Amato, Fernando Blaya Haro, Juan A. Juanes
2019	—	`conf`	A Finite Element Model for the Analysis of Squeaking Hips. TEEM Alessandro Ruggiero, Roberto D'Amato, Fernando Blaya Haro
2019	—	`conf`	Aesthetics in Orthopedic Products: Applications of the Advanced Manufacture (AM) to the Industrial Design of Orthoses. TEEM Pilar San Pedro Orozco, Fernando Blaya Haro, Patricia Campoy Quintana, Alonso Blaya San Pedro, Roberto D'Amato, Juan A. Juanes
2019	—	`conf`	Analysis of the anisotropy in parts for medical applications created by the superposition of layers of PLA and epoxy resin with the FFF & Robocasting techniques. TEEM Alberto Sánchez Ramírez, Fernando Blaya Haro, Roberto D'Amato, Juan A. Juanes, Manuel Islán Marcos
2019	J	`jnl`	Behavior under Load of A Human Shoulder: Finite Element Simulation and Analysis. J. Medical Syst. Manuel Islán Marcos, Emilio Lechosa Urquijo, Fernando Blaya Haro, Roberto D'Amato, Enrique Soriano Heras, Juan Antonio Juanes Méndez
2019	—	`conf`	Biomechanical normality model of the Human lumbar spine (Lumbosacral region). TEEM Fernando Blaya Haro, Pilar San Pedro Orozco, Alonso Blaya San Pedro, Roberto D'Amato, Juan A. Juanes, José Antonio Rodríguez Montes
2019	—	`conf`	Design and prototype of a control for virtual environment in CHD examination. TEEM Roberto D'Amato, Fernando Blaya Haro, D'emilton Alcântara, Juan A. Juanes, Alessandro Ruggiero
2019	—	`conf`	Design of Thermoplastic Oral Appliance With Mouth Opening Control to Treat Obstructive Sleep Apnea. TEEM Néstor Montesdeoca García, Emilio Lechosa Urquijo, Fernando Blaya Haro, Roberto D'Amato, Juan A. Juanes
2019	J	`jnl`	Design of a Functional Splint for Rehabilitation of Achilles Tendon Injury Using Advanced Manufacturing (AM) Techniques. Implementation Study. J. Medical Syst. Fernando Blaya Haro, Pilar San Pedro, Alonso Blaya San Pedro, Julia Lopez-Silva, Juan A. Juanes, Roberto D'Amato
2019	J	`jnl`	Experimental Comparison on Dental BioTribological Pairs Zirconia/Zirconia and Zirconia/Natural Tooth by Using a Reciprocating Tribometer. J. Medical Syst. Alessandro Ruggiero, Roberto D'Amato, Ludovico Sbordone, Fernando Blaya Haro, Antonio Lanza
2019	J	`jnl`	Geometric Model for the Postural Characterization in the Sagital Plane of Lumbar Raquis. J. Medical Syst. Pilar San Pedro, Fernando Blaya Haro, Roberto D'Amato, Juan A. Juanes, Luis Tomás Gallego Morales, José Antonio Rodríguez Montes
2019	—	`conf`	Methodology for the study of the influence of e-scooter vibrations on human health and comfort. TEEM Juan David Cano-Moreno, Manuel Islán Marcos, Fernando Blaya Haro, Roberto D'Amato, Juan A. Juanes, Enrique Soriano Heras
2019	J	`jnl`	Monitoring an Analysis of Perturbations in Fusion Deposition Modelling (FDM) Processes for the Use of Biomaterials. J. Medical Syst. Fernando Blaya Haro, José María de Agustín del Burgo, Roberto D'Amato, Manuel Islán Marcos, Enrique Soriano Heras, Jesus Manuel Garcia Alonso, Juan Antonio Juanes Méndez
2019	J	`jnl`	Novel Technique Based on Fused Filament Fabrication (FFF) and Robocasting to Create Composite Medical Parts. J. Medical Syst. Alberto Sánchez Ramírez, Roberto D'Amato, Fernando Blaya Haro, Manuel Islán Marcos, Juan A. Juanes
2019	J	`jnl`	Oral appliance for Obstructive Sleep Apnea: Prototyping and Optimization of the Mandibular Protrusion Device. J. Medical Syst. Néstor Montesdeoca García, Fernando Blaya Haro, Emilio Lechosa Urquijo, Enrique Soriano Heras, Roberto D'Amato
2019	—	`conf`	Preliminary Investigating on the Influence of Whitening on Natural Tooth Wear Resistance. TEEM Alessandro Ruggiero, Roberto D'Amato, Ludovico Sbordone, Fernando Blaya Haro, Emilio Cataldo, Antonio Lanza
2019	—	`conf`	Real time analysis of the filament for FDM 3D printers. TEEM José M. de Agustín del Burgo, Roberto D'Amato, Juan Antonio Juanes Méndez, Alberto Sánchez Ramírez, Fernando Blaya Haro, Enrique Soriano Heras
2018	—	`conf`	A study evaluating the level of satisfaction of the students of health sciences about the use of 3D printed bone models. TEEM Maria Teresa Ugidos Lozano, Roberto D'Amato, Alessandro Ruggiero, Sadia Manzoor, Fernando Blaya Haro, Juan Antonio Juanes Méndez
2018	J	`jnl`	Analysis and Fem Simulation Methodology of Dynamic Behavior of Human Rotator Cuff in Repetitive Routines: Musician Case Study. J. Medical Syst. Manuel Islan, Fernando Blaya Haro, Pilar San Pedro, Roberto D'Amato, Emilio Lechosa Urquijo, Juan Antonio Juanes Méndez
2018	—	`conf`	Composite material created by additive manufacturing techniques FFF and Robocasting for the manufacture of medical parts. TEEM Alberto Sánchez Ramírez, Roberto D'Amato, Fernando Blaya Haro, Manuel Islán Marcos, José M. de Agustín del Burgo
2018	—	`conf`	Design and prototyping by additive manufacturing of a functional splint for rehabilitation of Achilles tendon intrasubstance rupture. TEEM Fernando Blaya Haro, Pilar San Pedro, Alonso Blaya San Pedro, Julia Lopez-Silva, Juan A. Juanes, Roberto D'Amato
2018	J	`jnl`	Design of an Orthopedic Product by Using Additive Manufacturing Technology: The Arm Splint. J. Medical Syst. Fernando Blaya Haro, Pilar San Pedro, Julia Lopez-Silva, Roberto D'Amato, Enrique Soriano, Juan Antonio Juanes Méndez
2018	J	`jnl`	Filament Advance Detection Sensor for Fused Deposition Modelling 3D Printers. Sensors Enrique Soriano Heras, Fernando Blaya Haro, José M. de Agustín del Burgo, Manuel Islan, Roberto D'Amato
2018	—	`conf`	Finite Element Simulation and Analysis of the behavior under load of a human shoulder. TEEM Manuel Islán Marcos, Emilio Lechosa Urquijo, Fernando Blaya Haro, Roberto D'Amato, Juan A. Juanes, Enrique Soriano Heras
2018	—	`conf`	Monitoring of the additive manufacturing process for the use of biomaterials in medical field. TEEM Fernando Blaya Haro, José M. de Agustín del Burgo, Roberto D'Amato, Manuel Islán Marcos, Enrique Soriano Heras, Jesus Manuel Garcia Alonso
2018	—	`conf`	On the Dental BioTribology: Comparison of Zirconia/Zirconia and Zirconia/Natural Tooth Friction Coefficients by Using a Reciprocating Tribometer. TEEM Alessandro Ruggiero, Roberto D'Amato, Ludovico Sbordone, Fernando Blaya Haro, Antonio Lanza
2018	—	`conf`	Postural morphological model for the characterization of raquis lumbar. TEEM Pilar San Pedro, Fernando Blaya Haro, Roberto D'Amato, Juan A. Juanes, Luis Tomás Gallego Morales, José Antonio Rodríguez Montes
2018	—	`conf`	Study, Design and Prototyping of Oral Appliances to Treat Obstructive Sleep Apnea. TEEM Néstor Montesdeoca García, Fernando Blaya Haro, Emilio Lechosa Urquijo, Enrique Soriano Heras, Roberto D'Amato
2017	—	`conf`	Linear approximation of the behavior of the rotator cuff under fatigue conditions. Violinist case study. TEEM Manuel Islan, Jorge Carvajal, Pilar San Pedro, Roberto D'Amato, Juan A. Juanes, Enrique Soriano
2017	—	`conf`	Study, design and prototyping of arm splint with additive manufacturing process. TEEM Fernando Blaya Haro, Pilar San Pedro, Julia Lopez-Silva, Roberto D'Amato, Juan A. Juanes, Juan Gomez Lagándara
2016	J	`jnl`	Integration of Error Compensation of Coordinate Measuring Machines into Feature Measurement: Part I - Model Development. Sensors Roque Calvo, Roberto D'Amato, Emilio Gómez, Rosario Domingo
2016	J	`jnl`	Integration of Error Compensation of Coordinate Measuring Machines into Feature Measurement: Part II - Experimental Implementation. Sensors Roque Calvo, Roberto D'Amato, Emilio Gómez, Rosario Domingo