Peter Nyhuis

54 papers C 1Journal 20Unranked 32
YearRankTypeTitle / Venue / Authors
2026 J jnl
Assembly Precedence Matrix.
IEEE Access
Marco Bleckmann, Luca Mastroianni, Tim Meinecke, Peter Nyhuis
2026 J jnl
The Role of Reinforcement Learning in Production Control: A Systematic Literature Review.
IEEE Access
Jonas Schneider, Carl Pfannschmidt, Peter Nyhuis, Matthias Schmidt
2025 J jnl
Assembly Sequence Flexibility - Assembly Precedence Matrix-Based Evaluation Model.
IEEE Access
Marco Bleckmann, Luca Mastroianni, Meret Börgerding, Peter Nyhuis
2025 — conf
Reinforcement Learning in Production Control: A Deep Dive into Order Release.
APMS (1)
Jonas Schneider, Peter Nyhuis, Matthias Schmidt
2025 J jnl
Reinforcement Learning in Production Control: An Agent-Based Approach to Sequencing.
IEEE Access
Jonas Schneider, Tamara Hamfeld, Peter Nyhuis, Matthias Schmidt
2025 — conf
Scientific Concept for Analyzing the Potential of Energy-Oriented Production Planning and Control in SMEs.
APMS (5)
Manuel Rischmann, Markus Weber, Tobias Hiller, Stefan Roth, Tabea Marie Demke, Peter Nyhuis, Matthias Schmidt
2025 — conf
Use Phase-Oriented Innovation Assessment in Early Development Stages: A Value-In-Use Approach for Thermal Interface Materials.
APMS (2)
Friederike Stefanowski, Timon Steinhoff, Luca Köhnen, Christian Klose, Matthias Schmidt, Hans Jürgen Maier, Peter Nyhuis
2024 — conf
Enhancing German Manufacturing Competitiveness: Integrating B2B Platforms into the Industrial Value Chain.
PLM (1)
Mehmet Demir, Leonard Rieke, David Herberger, Peter Nyhuis
2024 — conf
Lifecycle-Orientated Cost Estimation in the Early Phase of Factory Planning.
PLM (1)
Leonard Rieke, Luca Philipp, Mehmet Demir, Peter Nyhuis
2024 J jnl
Throughput Time Predictions Along the Order Fulfilment Process.
IEEE Access
Tobias Hiller, Tabea Marie Demke, Peter Nyhuis
2023 — conf
Forecast-Based Dimensioning of Spare Parts Inventory Levels in the MRO Industry.
APMS (2)
Tabea Marie Demke, Tim Kämpfer, Torben Lucht, Jens Wachsmann, Peter Nyhuis
2023 — conf
Hybrid Production Structures as a Solution for Flexibility and Transformability for Longer Life Cycles of Production Systems.
PLM (2)
Dorit Schumann, Marco Bleckmann, Peter Nyhuis
2023 — conf
Introduction of an Approach for the Identification of Interfaces Between the Factory Planning Process and Quality Management for an Optimized Planning Result.
APMS (3)
Tanya Jahangirkhani, Ninja vom Stein, Peter Nyhuis, Manuel Löwer
2023 — conf
Simple Analysis of Planning Quality in Production Logistics.
APMS (3)
Tobias Hiller, Lena Osterkamp, Lea Vinke, Patrick Holtsch, Alexander Mütze, Peter Nyhuis
2022 — conf
Controlling Product Variance in a Factory Through the Evaluation of the Factory Life Cycle.
APMS (1)
Lennart Hingst, Peter Nyhuis
2022 — conf
Introducing a Fast Lane to Multi-Project Environments in Factories to Focus on Digital Transformation.
APMS (2)
Justin Hook, Lars Nielsen, Peter Nyhuis
2022 J jnl
Logistics-Oriented Production Configuration Using the Example of MRO Service Providers.
IEEE Access
Alexander Mütze, Torben Lucht, Peter Nyhuis
2022 — conf
Modelling Interdependencies Within Production Planning and Control: An Application-Motivated Approach.
APMS (1)
Alexander Mütze, Simon Hillnhagen, Matthias Schmidt, Peter Nyhuis
2022 — conf
Monetary Evaluation of Logistical Performance.
APMS (1)
Tammo Heuer, Vanessa Teuber, Peter Nyhuis
2022 — conf
Systemising Data-driven Methods for Predicting Throughput Time within Production Planning & Control.
IEEM
Tobias Hiller, Lukas Deipenwisch, Peter Nyhuis
2022 — conf
Using Distance Measures and Cluster Algorithms for Production Logistics-oriented Evaluation of Products and Product Portfolios.
IEEM
Tim Kämpfer, Sven Klaßen, Peter Nyhuis
2021 — conf
Integrated Repair Shop Scheduling and Spare Parts Pooling for Robust Product Regeneration.
IEEM
Torben Lucht, Anja Wojcik, Peter Nyhuis
2021 — conf
Logistical Potentials of Load Balancing via the Build-up and Reduction of Stock.
IEEM
Tammo Heuer, Janine Tatjana Maier, Tim D. Busse, Matthias Schmidt, Peter Nyhuis
2021 J jnl
Model-Based Approach for Assessing Planning Quality in Production Logistics.
IEEE Access
Torben Lucht, Alexander Mütze, Tim Kämpfer, Peter Nyhuis
2020 — conf
Supporting the Decision of the Order Processing Strategy by Using Logistic Models: A Case Study.
APMS (1)
Janine Tatjana Maier, Tammo Heuer, Peter Nyhuis, Matthias Schmidt
2020 — conf
Why a Systematic Investigation of Production Planning and Control Procedures is Needed for the Target-oriented Configuration of PPC.
IEEM
Alexander Mütze, Simon Hillnhagen, Philipp Schäfers, Matthias Schmidt, Peter Nyhuis
2019 — conf
A Data Mining Approach to Support Capacity Planning for the Regeneration of Complex Capital Goods.
APMS (2)
Melissa Seitz, Maren Sobotta, Peter Nyhuis
2018 J jnl
Lot sizing in the forging industry considering lot size dependent tool wear.
Prod. Eng.
Henrik Prinzhorn, Johannes Richter, Jan Langner, Malte Stonis, Peter Nyhuis
2018 J jnl
Preconditions for applying an energy price-oriented sequencing rule.
Prod. Eng.
Stefan Willeke, Henrik Prinzhorn, Malte Stonis, Peter Nyhuis
2017 — conf
An Optimization Model to Develop Efficient Dismantling Networks for Wind Turbines.
OR
Martin Westbomke, Jan-Hendrik Piel, Michael H. Breitner, Peter Nyhuis, Malte Stonis
2017 J jnl
Logistic modelling of lateness distributions in inventory systems.
Prod. Eng.
Peter Nyhuis, Jonas Mayer
2016 J jnl
Quantitative controlling approach of time synchronicity in convergent supply processes.
Prod. Eng.
Eric C. Hund, Philip Rochow, Florian Mach, Peter Nyhuis
2014 J jnl
Towards a definition of large scale products.
Prod. Eng.
Bernd-Arno Behrens, Peter Nyhuis, Ludger Overmeyer, Aaron Bentlage, Tilmann Rüther, Georg Ullmann
2013 J jnl
Validation of data fusion as a method for forecasting the regeneration workload for complex capital goods.
Prod. Eng.
Steffen C. Eickemeyer, Tim Borcherding, Sebastian Schäfer, Peter Nyhuis
2012 J jnl
Model based logistic monitoring for supply and assembly processes.
Prod. Eng.
Ben Münzberg, Matthias Schmidt, Sebastian Beck, Peter Nyhuis
2011 C conf
Component Monitoring with Integrated Sensors.
ICSEng
Borris van Thiel, Peter Nyhuis
2010 J jnl
Integrative factory, technology, and product planning-systemizing the information transfer on the operational level.
Prod. Eng.
Peter Nyhuis, Serjosha Wulf, Tim Klemke, Benjamin Hirsch
2009 J jnl
A systematic approach to analysis and design of global production networks.
Prod. Eng.
Carsten Wagner, Peter Nyhuis
2009 J jnl
Configuration and regulation of PPC.
Prod. Eng.
Peter Nyhuis, Ben Münzberg, Marco Kennemann
2009 — conf
Entwicklung eines Konzeptes zum Cost Benefit Sharing in Unternehmensnetzwerken.
PBFT
Sebastian Beck, Jan Helmig, Peter Nyhuis
2009 — conf
Stockout Costs in Logistics Unconsidered: Stockout Costs do Affect Service Level.
LDIC
Henner Gärtner, Rouven Nickel, Peter Nyhuis
2007 J jnl
A controlling system based on cause-effect relationships for the ramp-up of production systems.
Prod. Eng.
Helge Winkler, Michael Heins, Peter Nyhuis
2007 — conf
Derivation of Strategic Logistic Measures for Forging Systems.
APMS
Peter Nyhuis, Felix S. Wriggers, Tim D. Busse
2007 — conf
Ensuring the Consistency of Competitive Strategy and Logistic Performance Management.
APMS
Gregor von Cieminski, Peter Nyhuis
2007 — conf
Gentelligent® Parts: A Decentralized Information System for Enterprises.
CONFENIS (1)
Matthias Schmidt, Felix S. Wriggers, Frank Fisser, Peter Nyhuis
2007 J jnl
Modeling and analyzing logistic inter-dependencies in industrial-enterprise logistics.
Prod. Eng.
Gregor von Cieminski, Peter Nyhuis
2007 — conf
Service Level Driven Stock Allocation: A Model Based Enterprise Information System.
CONFENIS (1)
Felix S. Wriggers, Matthias Schmidt, Rouven Nickel, Peter Nyhuis
2006 — conf
Development of a Decentralized Logistics Controlling Concept.
PROLAMAT
Peter Nyhuis, Felix S. Wriggers, Andreas Fischer
2006 — conf
Supply Chain Management in Small and Medium-Sized Enterprises.
PROLAMAT
Peter Nyhuis, Katja Hasenfuß
2003 — conf
Influences of Human Operators on the Logistics of Manufacturing Cells.
APMS
Gregor von Cieminski, Peter Nyhuis
2003 — conf
Qualification of small and medium-sized car suppliers for mass customization due to suitable factory, production, and logistics structures.
MCPC
Peter Nyhuis, Marius Müller-Seegers
1992 J jnl
Betriebskennlinien in PPS - Grundlagen und Anwendungsbeispiele.
Wirtschaftsinf.
Hans-Peter Wiendahl, Peter Nyhuis
1992 — conf
Verbesserung der Termineinhaltung in komlexen Fertigungsbereichen durch einen neuen Ansatz zur Plan-Durchlaufzeit-Ermittlung.
GI Jahrestagung
Eberhard Ludwig, Peter Nyhuis
1991 — —
Durchlauforientierte Losgrössenbestimmung.
Peter Nyhuis