Mohamed Gabsi

20 papers C 3Journal 15Unranked 2
YearRankTypeTitle / Venue / Authors
2024 J jnl
AC Losses in Windings: Review and Comparison of Models With Application in Electric Machines.
IEEE Access
Taha El Hajji, Sami Hlioui, François Louf, Mohamed Gabsi, Anouar Belahcen, Guillaume Mermaz-Rollet, M'hamed Belhadi
2021 J jnl
Pre-optimization of hybridization ratio in hybrid excitation synchronous machines using electrical circuits modelling.
Math. Comput. Simul.
Yacine Amara, Sami Hlioui, A. Hamid Ben Ahmed, Mohamed Gabsi
2020 — conf
Detection and Localization of Interturn Short-Circuit Fault by Analysis of Stator Accelerations Spectrum in Five-Phase Flux Switching Machine for HEV Application.
EVER
Noemi Lanciotti, Javier Ojeda, Mohamed Gabsi, Taha Boukhobza
2019 J jnl
Structural optimization to maximize the flux control range of a double excitation synchronous machine.
Math. Comput. Simul.
Trung-Kien Hoang, Lionel Vido, Frédéric Gillon, Mohamed Gabsi
2017 J jnl
Design Optimization of a Hybrid-Excited Flux-Switching Machine for Aircraft-Safe DC Power Generation Using a Diode Bridge Rectifier.
IEEE Trans. Ind. Electron.
Andre Nasr, Sami Hlioui, Mohamed Gabsi, Mathieu Mairie, Didier Lalevee
2015 J jnl
Modeling and Optimization of a Linear Actuator for a Two-Stage Valve Tappet in an Automotive Engine.
IEEE Trans. Veh. Technol.
Jean-Laurent Duchaud, Sami Hlioui, François Louf, Javier Ojeda, Mohamed Gabsi
2014 J jnl
A Hybrid-Excited Flux-Switching Machine for High-Speed DC-Alternator Applications.
IEEE Trans. Ind. Electron.
Benjamin Gaussens, Emmanuel Hoang, Michel Lecrivain, Philippe Manfe, Mohamed Gabsi
2014 J jnl
Analytical Approach for Mechanical Resonance Frequencies of High-Speed Machines.
IEEE Trans. Ind. Electron.
Julien Boisson, François Louf, Javier Ojeda, Xavier Mininger, Mohamed Gabsi
2014 J jnl
Comparative Study of Classical and Mutually Coupled Switched Reluctance Motors Using Multiphysics Finite-Element Modeling.
IEEE Trans. Ind. Electron.
Xiaobin Liang, Guang-Jin Li, Javier Ojeda, Mohamed Gabsi, Zhuoxiang Ren
2013 J jnl
Bi-criteria optimization design of an interior permanent magnet synchronous machine for a hybrid electric vehicle application.
Math. Comput. Simul.
Phi Hung Nguyen, Emmanuel Hoang, Mohamed Gabsi
2013 J jnl
Hybrid excitation synchronous generator in embedded applications: Modeling and control.
Math. Comput. Simul.
Rita Mbayed, Georges Salloum, Lionel Vido, Eric Monmasson, Mohamed Gabsi
2012 C conf
Five-Phase Flux Switching Machine: Optimal current waveforms in order to improve open phase operation.
IECON
E. Ben Sedrine, Javier Ojeda, Ilhem Slama-Belkhodja, Mohamed Gabsi
2012 — conf
Hybrid coupling: Magnetic equivalent circuit coupled to finite element analysis for PMSM electromagnetic modeling.
ISIE
Boumedyen Nedjar, Lionel Vido, Sami Hlioui, Yacine Amara, Mohamed Gabsi
2012 C conf
Hybrid excitation synchronous motor control in electric vehicle with copper and iron losses minimization.
IECON
Rita Mbayed, Georges Salloum, Lionel Vido, Eric Monmasson, Mohamed Gabsi
2012 J jnl
Thermal-Electromagnetic Analysis for Driving Cycles of Embedded Flux-Switching Permanent-Magnet Motors.
IEEE Trans. Veh. Technol.
Guang-Jin Li, Javier Ojeda, Emmanuel Hoang, Mohamed Gabsi, Michel Lecrivain
2011 J jnl
Comparison of Open Circuit Flux Control Capability of a Series Double Excitation Machine and a Parallel Double Excitation Machine.
IEEE Trans. Veh. Technol.
Yacine Amara, Sami Hlioui, Rachid Belfkira, Georges Barakat, Mohamed Gabsi
2011 J jnl
Performance Synthesis of Permanent-Magnet Synchronous Machines During the Driving Cycle of a Hybrid Electric Vehicle.
IEEE Trans. Veh. Technol.
Phi Hung Nguyen, Emmanuel Hoang, Mohamed Gabsi
2009 J jnl
Hybrid Excitation Synchronous Machines: Energy-Efficient Solution for Vehicles Propulsion.
IEEE Trans. Veh. Technol.
Yacine Amara, Lionel Vido, Mohamed Gabsi, Emmanuel Hoang, Hamid Ben Ahmed, Michel Lecrivain
2008 J jnl
Control of a Hybrid Excitation Synchronous Generator for Aircraft Applications.
IEEE Trans. Ind. Electron.
Nicolas Patin, Lionel Vido, Eric Monmasson, Jean-Paul Louis, Mohamed Gabsi, Michel Lecrivain
2007 C conf
Noise Reduction Using Piezoelectric Active Control on High Speeds Switched Reluctance Drives.
IAS
X. Ojeda, Mohamed Gabsi, Michel Lecrivain, Xavier Mininger