Marion Merklein

39 papers C 1Misc 1Journal 34Unranked 3
YearRankTypeTitle / Venue / Authors
2025 — conf
On the Development of an Interactive Cause-Effect Learning System (CELS) for a Metal-Forming System Use Case.
ICKG
Josua Höfgen, Birgit Vogel-Heuser, Dominik Hujo-Lauer, Michael Lechner, Marion Merklein
2025 — conf
Using Style Transfer to Leverage Synthetic Data for Machine Learning-Based Quality Inspection in Forming Processes.
CASE
Achim Benfer, Dominik Hujo-Lauer, Marius Krüger, Kathrin Land, Michael Lechner, Marion Merklein, Birgit Vogel-Heuser
2024 — conf
A Comparative Investigation Introducing Regularization Techniques in Linear Regression Models for Quality Prediction in Forming Technology.
IEEM
Alejandra Vicaria, Birgit Vogel-Heuser, Marius Krüger, Marion Merklein, Michael Lechner
2024 J jnl
Cyber-Physical Systems in the Context of Industry 4.0: A Review, Categorization and Outlook.
Inf. Syst. Frontiers
Sascha Julian Oks, Max Jalowski, Michael Lechner, Stefan Mirschberger, Marion Merklein, Birgit Vogel-Heuser, Kathrin M. Möslein
2023 J jnl
Numerical modelling of the process chain for aluminium Tailored Heat-Treated Profiles.
Adv. Model. Simul. Eng. Sci.
Hannes Fröck, Matthias Graser, Michael Reich, Michael Lechner, Marion Merklein, Olaf Kessler
2021 J jnl
Fringe Projection Profilometry in Production Metrology: A Multi-Scale Comparison in Sheet-Bulk Metal Forming.
Sensors
Lennart Hinz, Sebastian Metzner, Philipp Müller, Robert Schulte, Hans-Bernward Besserer, Steffen Wackenrohr, Christopher Sauer, Markus Kästner, Tino Hausotte, Sven Hübner, Florian Nürnberger, Benjamin Schleich, Bernd-Arno Behrens, Sandro Wartzack, Marion Merklein, Eduard Reithmeier
2019 J jnl
Adaption of tool surface for sheet-bulk metal forming by means of pressurized air wet abrasive jet machining.
Prod. Eng.
Dennis Freiburg, R. Aßmuth, R. Garcia Carballo, Dirk Biermann, J. Henneberg, Marion Merklein
2018 J jnl
Influence of tribological conditions on cold forging of gears.
Prod. Eng.
Christoph Kiener, R. Neher, Marion Merklein
2017 C conf
Data-driven model development for quality prediction in forming technology.
INDIN
Iris Kirchen, Birgit Vogel-Heuser, Philipp Hildenbrand, Robert Schulte, Manfred Vogel, Michael Lechner, Marion Merklein
2017 J jnl
Dynamic correction of oscillatory forces during ultrasonic-assisted metal forming.
Prod. Eng.
Markus Michalski, Uwe Leicht, Andrew Heath, Marion Merklein
2017 Misc conf
Sheet metal forming limits as classification problem.
MVA
Christian Jaremenko, Xiaolin Huang, Emanuela Affronti, Marion Merklein, Andreas K. Maier
2016 J jnl
A non-invasive form finding method with application to metal forming.
Prod. Eng.
Philipp Landkammer, Thomas Schneider, Robert Schulte, Paul Steinmann, Marion Merklein
2016 J jnl
Experimental and numerical analysis of tribological effective surfaces for forming tools in Sheet-Bulk Metal Forming.
Prod. Eng.
Petra Kersting, Daniel Gröbel, Marion Merklein, Peter Sieczkarek, Sebastian Wernicke, A. Erman Tekkaya, Eugen Krebs, Dennis Freiburg, Dirk Biermann, Tim Weikert, Stephan Tremmel, Dominic Stangier, Wolfgang Tillmann, Steffen Matthias, Eduard Reithmeier, Maria Löffler, Florian Beyer, Kai Willner
2016 J jnl
Influence of short-term heat treatment on the microstructure and mechanical properties of EN AW-6060 T4 extrusion profiles - Part B.
Prod. Eng.
Matthias Graser, Hannes Fröck, Michael Lechner, Michael Reich, Olaf Kessler, Marion Merklein
2016 J jnl
Influence of short-term heat treatment on the microstructure and mechanical properties of EN AW-6060 T4 extrusion profiles: Part A.
Prod. Eng.
Hannes Fröck, Matthias Graser, Michael Reich, Michael Lechner, Marion Merklein, Olaf Kessler
2016 J jnl
Introduction to sheet-bulk metal forming.
Prod. Eng.
Marion Merklein, Hinnerk Hagenah
2016 J jnl
Investigations of ductile damage during the process chains of toothed functional components manufactured by sheet-bulk metal forming.
Prod. Eng.
Kerim Isik, Gregory Gerstein, Thomas Schneider, Robert Schulte, Daniel Rosenbusch, Till Clausmeyer, Florian Nürnberger, Milan Vucetic, Sergej Koch, Sven Hübner, Bernd-Arno Behrens, A. Erman Tekkaya, Marion Merklein
2016 J jnl
Manufacturing of functional elements by sheet-bulk metal forming processes.
Prod. Eng.
Daniel Gröbel, Robert Schulte, Philipp Hildenbrand, Michael Lechner, Ulf Engel, Peter Sieczkarek, Sebastian Wernicke, Soren Gies, A. Erman Tekkaya, Bernd-Arno Behrens, Sven Hübner, Milan Vucetic, Sergej Koch, Marion Merklein
2016 J jnl
Tailored heat treated accumulative roll bonded aluminum blanks: failure under bending stresses.
Prod. Eng.
Hung Nguyen, Wolfgang Böhm, Ioannis Tsoupis, Mathias Göken, H. W. Höppel, Christian W. Schmidt, Tina Hausöl, Michaela Ruppert, Marion Merklein
2016 J jnl
Tribological measures for controlling material flow in sheet-bulk metal forming.
Prod. Eng.
Maria Löffler, Kolja Andreas, Ulf Engel, Robert Schulte, Daniel Gröbel, Eugen Krebs, Dennis Freiburg, Dirk Biermann, Dominic Stangier, Wolfgang Tillmann, Tim Weikert, Sandro Wartzack, Stephan Tremmel, Henning Lucas, Berend Denkena, Marion Merklein
2015 J jnl
Approach to minimize the distortion of 6xxx-aluminum tailor heat treated blanks in industrial applications.
Prod. Eng.
Alexander Kahrimanidis, Daniel Wortberg, Marion Merklein
2015 J jnl
Bending of unidirectional non-crimp-fabrics: experimental characterization, constitutive modeling and application in finite element simulation.
Prod. Eng.
Thomas Senner, S. Kreissl, Marion Merklein, M. Meinhardt, Arnulf Lipp
2015 J jnl
High-feed milling of tailored surfaces for sheet-bulk metal forming tools.
Prod. Eng.
Rouven Hense, Christoph Wels, Petra Kersting, Ulrich Vierzigmann, Maria Löffler, Dirk Biermann, Marion Merklein
2015 J jnl
Influence of a retrogression and reaging (RRA)-treatment on the mechanical and microstructural characteristics of the aluminium alloy AlZn4, 5Mg1.
Prod. Eng.
Nora Jaburek, Marion Merklein
2014 J jnl
A modular modeling approach for describing the in-plane forming behavior of unidirectional non-crimp-fabrics.
Prod. Eng.
Thomas Senner, S. Kreissl, Marion Merklein, Josef Meinhardt, Arnulf Lipp
2014 J jnl
Determination of friction coefficients in deep drawing by modification of Siebel's formula for calculation of ideal drawing force.
Prod. Eng.
Martin Grüner, Marion Merklein
2014 J jnl
Improvement of surface integrity of cold forging tools by adaption of tool making process.
Prod. Eng.
Kolja Andreas, Marion Merklein
2014 J jnl
Improving formability due to an enhancement of sealing limits caused by using a smart fluid as active fluid medium for hydroforming.
Prod. Eng.
Sebastian Rösel, Marion Merklein
2014 J jnl
The influence of annealing process in the fabrication of helical needles for sutures in deep-wound cavities.
Int. J. Comput. Integr. Manuf.
Raoul Plettke, Daniel Vipavc, Martin Grüner, Hinnerk Hagenah, Marion Merklein
2013 J jnl
Hot stamping: manufacturing functional optimized components.
Prod. Eng.
Marion Merklein, Thomas Svec
2013 J jnl
Prediction of damage in small curvature bending processes of high strength steels using continuum damage mechanics model in 3D simulation.
Prod. Eng.
Ioannis Tsoupis, Sven Hildering, Marion Merklein
2012 J jnl
Enhancement of formability of aluminum alloys in multi-stage forming operations by a local intermediate heat treatment.
Prod. Eng.
Marion Merklein, Michael Lechner, Andreas Kuppert
2010 J jnl
Basic investigations on boundary lubrication in metal forming processes by in situ observation of the real contact area.
Prod. Eng.
Stephan Weidel, Ulf Engel, Marion Merklein, Manfred Geiger
2010 J jnl
Size effects in bending processes applied to metal foils.
Prod. Eng.
Alexander Diehl, Ulf Engel, Marion Merklein, Manfred Geiger
2009 J jnl
Aluminum tailored heat treated blanks.
Prod. Eng.
Manfred Geiger, Marion Merklein, Uwe Vogt
2009 J jnl
Hydroforming of inhomogeneous sheet pairs with counterpressure.
Prod. Eng.
Manfred Geiger, Marion Merklein, M. Cojutti
2008 J jnl
An inverse approach to the numerical design of the process sequence of tailored heat treated blanks.
Prod. Eng.
Manfred Geiger, Marion Merklein, Detlev Staud, Markus Kaupper
2008 J jnl
Determination of tribological conditions within hot stamping.
Prod. Eng.
Manfred Geiger, Marion Merklein, Jürgen Lechler
2008 J jnl
Experimental determination of yield loci for magnesium alloy AZ31 under biaxial tensile stress conditions at elevated temperatures.
Prod. Eng.
Manfred Geiger, Marion Merklein, Wolfgang Hußnätter, Martin Grüner