Marco Laracca

47 papers C 1Journal 24Unranked 22
YearRankTypeTitle / Venue / Authors
2025 — conf
An improvement in defect detection through integration of Rotating Eddy Currents and multi-tone excitation.
I2MTC
Federico Carere, Alessandro Sardellitti, Silvia Sangiovanni, Andrea Bernieri, Marco Laracca
2025 J jnl
Enhancing Corrosion Detection and Characterization: An Innovative Approach With Pot-Cored Eddy Current Probe.
IEEE Trans. Instrum. Meas.
Alessandro Sardellitti, Filippo Milano, Marco Laracca, Luigi Ferrigno, Antonello Tamburrino, Guiyun Tian
2025 — conf
Numerical modeling for lithium iron phosphate batteries.
I2MTC
B. Palmieri, A. Martone, Alessio Miele, Filippo Milano, Mario Molinara, Luigi Ferrigno, Gianni Cerro, Marco Laracca
2024 — conf
A Method to Design Open Loop Current Transducers for Busbar Applications.
I2MTC
Federico Carere, Marco Laracca, Davide Saccavini, Silvia Sangiovanni
2024 J jnl
An Eddy Current Probe for the Detection of Subsuperficial Defects of Any Orientation.
IEEE Trans. Instrum. Meas.
Federico Carere, Alessandro Sardellitti, Andrea Bernieri, Luigi Ferrigno, Silvia Sangiovanni, Marco Laracca
2024 — conf
Assessing Impact of Uncertainty on a Decision Support System for Flexibility Exploitation in a Distribution Network.
I2MTC
Tommaso Bragatto, Federico Carere, Alberto Geri, Marco Laracca, Parastou Poursoltan, Silvia Sangiovanni
2024 J jnl
BLE-Based Indoor Localization: Analysis of Some Solutions for Performance Improvement.
Sensors
Filippo Milano, Helbert da Rocha, Marco Laracca, Luigi Ferrigno, António Espírito-Santo, José A. C. Salvado, Vincenzo Paciello
2024 — conf
Multi-Parameter Estimation by combining Dimensional Analysis and Eddy Current Testing.
MetroInd4.0 & IoT
Alessandro Sardellitti, Vincenzo Mottola, Filippo Milano, Luigi Ferrigno, Antonello Tamburrino, Marco Laracca
2024 — conf
Novel Approach for Battery State of Charge Evaluation through Inductive Sensing.
I2MTC
Carmine Bourelly, Filippo Milano, Luigi Ferrigno, Marco Laracca, Gui Yun Tian
2024 — conf
Performance Enhancement of Graphene-Based Biopotential Electrodes through Electrical Contact Geometry Optimization.
M&N
Babar Ali, Umar Farooq, Marco Laracca, Hossein Cheraghi Bidsorkhi, Alessandro Gioseppe D'Aloia, Maria Sabrina Sarto
2023 J jnl
A Non-Invasive Technique for Long-Term Monitoring of Gastroesophageal Reflux - A Pilot Study.
Sensors
Marco Laracca, Gianfranco Miele, Luca Podestà, Silvia Sangiovanni
2023 — conf
A test bed for in-laboratory calibration of optical-based speedometers.
I2MTC
Andrea Bernieri, G. Iannitti, Marco Laracca, Gianfranco Miele, Silvia Sangiovanni
2023 — conf
An Analytical Model for Lithium-Ion Batteries Based on Genetic Programming Approach.
MetroAutomotive
Filippo Milano, Giulia Di Capua, Nunzio Oliva, Francesco Porpora, Carmine Bourelly, Luigi Ferrigno, Marco Laracca
2023 J jnl
An Eddy-Current Testing Method for Measuring the Thickness of Metallic Plates.
IEEE Trans. Instrum. Meas.
Alessandro Sardellitti, Filippo Milano, Marco Laracca, Salvatore Ventre, Luigi Ferrigno, Antonello Tamburrino
2022 J jnl
A Fast ECT Measurement Method for the Thickness of Metallic Plates.
IEEE Trans. Instrum. Meas.
Alessandro Sardellitti, Giulia Di Capua, Marco Laracca, Antonello Tamburrino, Salvatore Ventre, Luigi Ferrigno
2022 — conf
Performance comparison in Ultra Wide Band positioning in sensor networks: least square minimization versus grid search approach.
M&N
Luigi Ferrigno, Filippo Milano, Valentina Pingerna, Gianni Cerro, Marco Laracca
2022 J jnl
UWB-Based Indoor Localization: How to Optimally Design the Operating Setup?
IEEE Trans. Instrum. Meas.
Gianni Cerro, Luigi Ferrigno, Marco Laracca, Gianfranco Miele, Filippo Milano, Valentina Pingerna
2022 J jnl
Use of Magnetic Positioning Systems in Industrial and Biomedical Applications.
IEEE Instrum. Meas. Mag.
Andrea Bernieri, Gianni Cerro, Luigi Ferrigno, Marco Laracca, Filippo Milano
2021 — conf
A UWB-based localization system: analysis of the effect of anchor positions and robustness enhancement in indoor environments.
I2MTC
Luigi Ferrigno, Gianfranco Miele, Filippo Milano, Valentina Pingerna, Gianni Cerro, Marco Laracca
2021 — conf
Analysis of the Uncertainty Contributions for on Board Vehicle Speed Meters Calibration Method.
MetroAutomotive
Luigi Ferrigno, Marco Laracca, Adolfo Martucci, Gianfranco Miele, Silvia Sangiovanni
2021 J jnl
Magnetic Localization System for Short-Range Positioning: A Ready-to-Use Design Tool.
IEEE Trans. Instrum. Meas.
Luigi Ferrigno, Marco Laracca, Filippo Milano, Gianni Cerro, Paolo Bellitti, Mauro Serpelloni, Oscar Casas Piedrafita
2021 C conf
On the Power Consumption of a Bluetooth Device Operating in Beacon Mode.
IECON
Luigi Ferrigno, Filippo Milano, António Espírito-Santo, José A. C. Salvado, Marco Laracca, Vincenzo Paciello
2020 — conf
On a finite domain magnetic localization by means of TMR triaxial sensors.
I2MTC
Gianni Cerro, Luigi Ferrigno, Marco Laracca, Filippo Milano, Paolo Bellitti, Mauro Serpelloni, Oscar Casas Piedrafita
2020 J jnl
On the Calibration of GNSS-Based Vehicle Speed Meters.
Sensors
Adolfo Martucci, Giovanni Cerasuolo, Orsola Petrella, Marco Laracca
2019 — conf
An Uncertainty Analysis for the Calibration of GNSS-Based Vehicle Speed Meters.
MetroInd4.0&IoT
Adolfo Martucci, Giovanni Cerasuolo, Orsola Petrella, Marco Laracca
2019 J jnl
Eddy Current Testing Probe Based on Double-Coil Excitation and GMR Sensor.
IEEE Trans. Instrum. Meas.
Andrea Bernieri, Luigi Ferrigno, Marco Laracca, Antonio Rasile
2018 — conf
Calibration System for Multi-sensor Acoustical Systems.
Sensors
Orsola Petrella, Giovanni Cerasuolo, Salvatore Ameduri, Vincenzo Quaranta, Marco Laracca
2018 — conf
Characterization of a TMR Sensor for EC-NDT Applications.
Sensors
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca, Antonio Rasile
2018 — conf
ECT probe improvement for in-service non-destructive testing on conductive materials.
I2MTC
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca, Antonio Rasile
2018 J jnl
Fast Eddy Current Testing Defect Classification Using Lissajous Figures.
IEEE Trans. Instrum. Meas.
Gianni D'Angelo, Marco Laracca, Salvatore Rampone, Giovanni Betta
2018 — conf
Improvement of the Frequency Behavior of an EC-NDT Inspection System.
Sensors
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca, Antonio Rasile
2018 J jnl
Metrological Characterization of a Novel Microsensor Platform for Activated Carbon Filters Monitoring.
IEEE Trans. Instrum. Meas.
Gianni Cerro, Marco Ferdinandi, Luigi Ferrigno, Marco Laracca, Mario Molinara
2014 J jnl
An Experimental Setup for the Calibration of Acoustic Antenna.
IEEE Trans. Instrum. Meas.
Orsola Petrella, Salvatore Ameduri, Vincenzo Quaranta, Giovanni Betta, Marco Laracca
2014 J jnl
Multifrequency Excitation and Support Vector Machine Regressor for ECT Defect Characterization.
IEEE Trans. Instrum. Meas.
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca, Stefano Mastrostefano
2014 — conf
Optimized complex signals for Eddy Current Testing.
I2MTC
Giovanni Betta, Luigi Ferrigno, Marco Laracca, Pietro Burrascano, Marco Ricci
2013 — conf
A novel biaxial probe implementing multifrequency excitation and SVM processing for NDT.
I2MTC
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca
2013 J jnl
Cost-Effective FPGA Instrument for Harmonic and Interharmonic Monitoring.
IEEE Trans. Instrum. Meas.
Giovanni Betta, Luigi Ferrigno, Marco Laracca
2013 J jnl
Crack Depth Estimation by Using a Multi-Frequency ECT Method.
IEEE Trans. Instrum. Meas.
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca
2013 — conf
Modelling, parametric analysis, and optimization of an experimental set-up for acoustic antenna calibration.
I2MTC
Orsola Petrella, Salvatore Ameduri, Vincenzo Quaranta, Giovanni Betta, Marco Laracca
2013 — conf
On the suitability of compressive sampling for the measurement of electrical power quality.
I2MTC
Francesco Bonavolontà, Mauro D'Arco, Giacomo Ianniello, Annalisa Liccardo, Rosario Schiano Lo Moriello, Luigi Ferrigno, Marco Laracca, Gianfranco Miele
2012 J jnl
An FPGA-Based Instrument for the Estimation of R, L, and C Parameters Under Nonsinusoidal Conditions.
IEEE Trans. Instrum. Meas.
Luigi Ferrigno, Marco Laracca, Consolatina Liguori, Antonio Pietrosanto
2012 J jnl
GMR-Based ECT Instrument for Detection and Characterization of Crack on a Planar Specimen: A Hand-Held Solution.
IEEE Trans. Instrum. Meas.
Giovanni Betta, Luigi Ferrigno, Marco Laracca
2008 J jnl
Crack Shape Reconstruction in Eddy Current Testing Using Machine Learning Systems for Regression.
IEEE Trans. Instrum. Meas.
Andrea Bernieri, Luigi Ferrigno, Marco Laracca, Mario Molinara
2008 J jnl
Measurement of Passive R, L, and C Components Under Nonsinusoidal Conditions: The Solution of Some Case Studies.
IEEE Trans. Instrum. Meas.
Luigi Ferrigno, Marco Laracca, Antonio Pietrosanto
2006 J jnl
Reproducibility and Uncertainty of Conducted Emission Measurements for Adjustable-Speed Electrical Power Drive Characterization.
IEEE Trans. Instrum. Meas.
Giovanni Betta, Domenico Capriglione, Marco Laracca
2004 J jnl
A biaxial probe for nondestructive testing on conductive materials.
IEEE Trans. Instrum. Meas.
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca
2004 J jnl
An automated self-calibrated instrument for nondestructive testing on conductive materials.
IEEE Trans. Instrum. Meas.
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca