Koichi Morishige

14 papers A* 1Journal 12Unranked 1
YearRankTypeTitle / Venue / Authors
2024 J jnl
C-Space-Based Toolpath Generation for Five-Axis Controlled Machining with Special Tools.
Int. J. Autom. Technol.
Ken Okamoto, Koichi Morishige
2022 J jnl
Generation of a Robot Program and Determination of an Optimal Workpiece Placement Considering the Manipulability of Industrial Robots.
Int. J. Autom. Technol.
Kei Moriguchi, Takuya Mizokami, Koichi Morishige
2021 J jnl
Tool Path Generation for Five-Axis Controlled Machining of Free-Form Surfaces Using a Barrel Tool Considering Continuity of Tool Postures.
Int. J. Autom. Technol.
Tomonobu Suzuki, Ken Okamoto, Koichi Morishige
2020 J jnl
Tool Path Generation for 5-Axis Rough Cutting Using Haptic Device.
Int. J. Autom. Technol.
Koichi Morishige, Satoshi Mori
2014 J jnl
Development of Turning Machine Operation Interface that Uses Haptic Device.
Int. J. Autom. Technol.
Raiyo Oka, Koichi Morishige
2012 J jnl
Editorial: Rapid Prototyping.
Int. J. Autom. Technol.
Koichi Morishige, Masahiro Anzai, Hiroyuki Narahara
2012 J jnl
Tool Path Generation for Five-Axis Controlled Machining with Consideration of Structural Interference.
Int. J. Autom. Technol.
Tomoyuki Kanda, Koichi Morishige
2011 J jnl
Tool Path Generation for Five-Axis Controlled Machining with Consideration of Motion of Two Rotational Axes.
Int. J. Autom. Technol.
Koichi Morishige, Makoto Kaneko
2009 J jnl
Polishing Process Automation by Industrial Robots with Polished Surface Quality Judged Based on Imaging Processing.
Int. J. Autom. Technol.
Tomoya Ito, Koichi Morishige
2008 J jnl
Editorial: Dies and Molds.
Int. J. Autom. Technol.
Koichi Morishige
2008 J jnl
Editorial: Rapid Prototying.
Int. J. Autom. Technol.
Hiroyuki Narahara, Koichi Morishige
2007 J jnl
Development of Tool Fabrication CAD/CAM for Conicoid End Mill.
Int. J. Autom. Technol.
Koichi Morishige, Shingo Ishizuka, Yoshimi Takeuchi
1998 — conf
Five-Axis Control Sculptured Surface Machining Using Conicoid End Mill.
SSM
Koichi Morishige, Teruhisa Nasu, Yoshimi Takeuchi
1997 A* conf
5-axis control rough cutting of an impeller with efficiency and accuracy.
ICRA
Koichi Morishige, Yoshimi Takeuchi