Jean-Pierre Kenné

42 papers A 1C 3Journal 28Unranked 10
YearRankTypeTitle / Venue / Authors
2025 C conf
Advanced Predictive Process Control for Industrial Thickeners.
SIMULTECH
Mouna El Hamrani, Khalid Benjelloun, Jean-Pierre Kenné, Maarouf Saad, Mohamed El Khouakhi
2025 A conf
Optimization of Sliding Mode Control Parameters to Improve Passenger Comfort, Road Handling and Reduce Chattering in Active Electrohydraulic Suspension Systems.
ICCAD
Rachid Fattah, Jean-Pierre Kenné, Khalid Benjelloun, Ahmed Chebak
2025 J jnl
Optimization of the Backstepping Control Parameters of an Active Electrohydraulic Suspension to Improve Passenger Comfort and Road Handling.
IEEE Access
Rachid Fattah, Jean-Pierre Kenné, Khalid Benjelloun, Ahmed Chebak
2024 J jnl
A novel approach for predicting Lockout/Tagout safety procedures for smart maintenance strategies.
Int. J. Prod. Res.
Victor Delpla, Kévin Chapron, Jean-Pierre Kenné, Lucas A. Hof
2024 J jnl
Estimation-based production control of manufacturing-remanufacturing systems with uncertain seasonal return and imprecise demand and inventory.
Int. J. Prod. Res.
Vladimir Polotski, Jean-Pierre Kenné, Ali Gharbi
2023 J jnl
On the development of a smart architecture for a sustainable manufacturing-remanufacturing system: A literature review approach.
Comput. Ind. Eng.
Camilo Mejía-Moncayo, Jean-Pierre Kenné, Lucas A. Hof
2021 — conf
A Hybrid Architecture for a Reconfigurable Cellular Remanufacturing System.
APMS (2)
Camilo Mejía-Moncayo, Jean-Pierre Kenné, Lucas A. Hof
2021 J jnl
Modelling for cost and productivity optimisation in sustainable manufacturing: a case of dry versus wet machining of mould steels.
Int. J. Prod. Res.
Oluwole Olufayo, Victor Songmene, Jean-Pierre Kenné, Michael Ayomoh
2021 J jnl
Multi-scenario and multi-criteria approach to evaluate prediction techniques used to recognise failure patterns.
Int. J. Appl. Decis. Sci.
Mahdi Mohammadi Tehrani, Mohammadsadegh Mobin, Yvan Beauregard, Michel Rioux, Jean-Pierre Kenné
2020 J jnl
Joint optimization of production and maintenance strategies considering a dynamic sampling strategy for a deteriorating system.
Comput. Ind. Eng.
Héctor Rivera-Gómez, Ali Gharbi, Jean-Pierre Kenné, Oscar Montaño Arango, Jose Ramón Corona-Armenta
2019 J jnl
Production control of hybrid manufacturing-remanufacturing systems under demand and return variations.
Int. J. Prod. Res.
Vladimir Polotski, Jean-Pierre Kenné, Ali Gharbi
2018 J jnl
A chattering-free fuzzy hybrid sliding mode control of an electrohydraulic active suspension.
Trans. Inst. Meas. Control
Bassel Shaer, Jean-Pierre Kenné, Claude Kaddissi, Charles J. Fallaha
2018 J jnl
Production and replacement policies for a deteriorating manufacturing system under random demand and quality.
Eur. J. Oper. Res.
Samir Ouaret, Jean-Pierre Kenné, Ali Gharbi
2017 J jnl
Set-up and production planning in hybrid manufacturing-remanufacturing systems with large returns.
Int. J. Prod. Res.
Vladimir Polotski, Jean-Pierre Kenné, Ali Gharbi
2016 J jnl
Production Planning of a Failure-Prone Manufacturing System under Different Setup Scenarios.
J. Appl. Math.
Guy-Richard Kibouka, Donatien Nganga-Kouya, Jean-Pierre Kenné, Victor Songmene, Vladimir Polotski
2016 — conf
Production control of a deteriorated remanufacturing system within an open-reverse supply chain.
MED
F. I. Dehayem Nodem, Jean-Pierre Kenné
2015 J jnl
Development of a whole arm wearable robotic exoskeleton for rehabilitation and to assist upper limb movements.
Robotica
Mohammad Habibur Rahman, Md. Jahidur Rahman, Cristóbal Ochoa-Luna, Maarouf Saad, Jean-Pierre Kenné, Philippe S. Archambault
2015 J jnl
Failure-prone manufacturing systems with setups: feasibility and optimality under various hypotheses about perturbations and setup interplay.
Int. J. Math. Oper. Res.
Vladimir Polotski, Jean-Pierre Kenné, Ali Gharbi
2013 — conf
Analytical Modelling and Control of a Hybrid Manufacturing/remanufacturing System.
MIM
Annie Kouedeu, Jean-Pierre Kenné, Pierre Dejax, Victor Songmene, Vladimir Polotski
2013 — conf
Manufacturing-Remanufacturing Failure-Prone Systems under Random Demands.
MIM
Vladimir Polotski, Samir Ouaret, Jean-Pierre Kenné, Ali Gharbi
2012 C conf
Cartesian trajectory tracking of an upper limb exoskeleton robot.
IECON
Mohammad Habibur Rahman, Maarouf Saad, Cristóbal Ochoa-Luna, Jean-Pierre Kenné, Philippe S. Archambault
2012 J jnl
Development of a 4DoFs exoskeleton robot for passive arm movement assistance.
Int. J. Mechatronics Autom.
Mohammad Habibur Rahman, Maarouf Saad, Jean-Pierre Kenné, Philippe S. Archambault, Thierry Kittel-Ouimet
2012 J jnl
Feedback Linearization-Based Position Control of an Electrohydraulic Servo System With Supply Pressure Uncertainty.
IEEE Trans. Control. Syst. Technol.
H. A. Mintsa, R. Venugopal, Jean-Pierre Kenné, C. Belleau
2012 — conf
Nonlinear Sliding Mode Control Implementation of an Upper Limb Exoskeleton Robot to Provide Passive Rehabilitation Therapy.
ICIRA (2)
Mohammad Habibur Rahman, Maarouf Saad, Jean-Pierre Kenné, Philippe S. Archambault
2012 J jnl
Simultaneous control of maintenance and production rates of a manufacturing system with defective products.
J. Intell. Manuf.
Achille N. Njike, Robert Pellerin, Jean-Pierre Kenné
2011 — conf
Control of a powered exoskeleton for elbow, forearm and wrist joint movements.
ROBIO
Mohammad Habibur Rahman, Thierry Kittel-Ouimet, Maarouf Saad, Jean-Pierre Kenné, Philippe S. Archambault
2011 J jnl
Dynamic Modeling and Evaluation of a Robotic Exoskeleton for Upper-Limb Rehabilitation.
Int. J. Inf. Acquis.
Mohammad Habibur Rahman, Thierry Kittel-Ouimet, Maarouf Saad, Jean-Pierre Kenné, Philippe S. Archambault
2011 — conf
Nonlinear control of an upper-limb exoskelton robot.
ICECS
Mohammad Habibur Rahman, Thierry Kittel-Ouimet, Maarouf Saad, Jean-Pierre Kenné, Philippe S. Archambault
2011 J jnl
Production control and replenishment strategy with multiple suppliers.
Eur. J. Oper. Res.
Adnène Hajji, Ali Gharbi, Jean-Pierre Kenné, Robert Pellerin
2011 — conf
Tele-operation of a robotic exoskeleton for rehabilitation and passive arm movement assistance.
ROBIO
Mohammad Habibur Rahman, Thierry Kittel-Ouimet, Maarouf Saad, Jean-Pierre Kenné, Philippe S. Archambault
2010 J jnl
Joint production and supply control in three levels flexible manufacturing systems.
J. Intell. Manuf.
Adnène Hajji, Ali Gharbi, Jean-Pierre Kenné
2009 J jnl
Hierarchical decision making in production and repair/replacement planning with imperfect repairs under uncertainties.
Eur. J. Oper. Res.
F. I. Dehayem Nodem, Jean-Pierre Kenné, Anis Gharbi
2009 — conf
Modeling and control of a 7DOF exoskeleton robot for arm movements.
ROBIO
Mohammad Habibur Rahman, Maarouf Saad, Jean-Pierre Kenné, Philippe S. Archambault
2009 J jnl
On the integrated production, inventory and preventive maintenance problem in manufacturing systems with backorder.
Int. J. Simul. Process. Model.
Jean-Pierre Kenné, Ali Gharbi, Najib M. Najid
2007 J jnl
Age-dependent production planning and maintenance strategies in unreliable manufacturing systems with lost sale.
Eur. J. Oper. Res.
Jean-Pierre Kenné, Anis Gharbi, M. Beit
2007 J jnl
Développement d'une politique intégrée de contrôle des taux de production et de maintenance corrective avec diagnostic.
INFOR Inf. Syst. Oper. Res.
Robert Pellerin, Jean-François Boulet, Ali Gharbi, Jean-Pierre Kenné
2005 C conf
Drive by wire control of an electro-hydraulic active suspension a backstepping approach.
CCA
Claude Kaddissi, Jean-Pierre Kenné, Maarouf Saad
2005 J jnl
Maintenance scheduling and production control of multiple-machine manufacturing systems.
Comput. Ind. Eng.
Ali Gharbi, Jean-Pierre Kenné
2004 J jnl
A simulation optimization based control policy for failure prone one-machine, two-product manufacturing systems.
Comput. Ind. Eng.
Jean-Pierre Kenné, Ali Gharbi
2004 — conf
Position Control of an Electro-Hydraulic Servosystem - A Non-Linear Backstepping Approach.
ICINCO (2)
Claude Kaddissi, Jean-Pierre Kenné, Maarouf Saad
2004 J jnl
Stohastic optimal production control problem with corrective maintenance.
Comput. Ind. Eng.
Jean-Pierre Kenné, Ali Gharbi
2001 J jnl
A simulation optimization approach in production planning of failure prone manufacturing systems.
J. Intell. Manuf.
Jean-Pierre Kenné, Ali Gharbi