Ingo Hahn

29 papers B 1C 19Unranked 9
YearRankTypeTitle / Venue / Authors
2024 B conf
On Experimental Energy Consumption Estimation of a 6-DoF Industrial UR3e Robot Arm Manipulator in Trajectory Planning.
RO-MAN
Sara Hosseini, Ingo Hahn
2022 — conf
Topology Optimization of a PM Synchronous Machine Based on Novel Metaheuristic Algorithm for Lower Cogging Torque and Magnet Volume.
ICIT
Shabnam Ruzbehi, Ingo Hahn
2021 — conf
A Performance Comparison of GaN FET and Silicon MOSFET.
ICIT
Shima Khoshzaman, Ingo Hahn
2021 C conf
Deterministic winding function model for slotted induction machines validated by air gap magnetic field measurements.
IECON
Matthias Stiller, Ingo Hahn
2021 C conf
Dynamic On-State Resistance Characterization of GaN FET under Hard-Switching Conditions.
IECON
Shima Khoshzaman, Yikai Tang, Ingo Hahn
2021 C conf
Modelling the Influence of the Mechanical Forces on the Commutation Process of a DC Motor.
IECON
Johannes Wagner, Ingo Hahn
2021 — conf
Numerical modeling for 3D eddy current calculation in magneto-quasistatic approximation.
ICIT
Jaeho Ryu, Ingo Hahn
2021 C conf
Two-level Topology Optimization based on a Metaheuristic Method and Morphological Reconstruction.
IECON
Shabnam Ruzbehi, Ingo Hahn
2020 — conf
Kinodynamic Motion Planning and Energy Loss Cost Function Modelling for a 2- DOF Robot Arm Manipulator.
ICIT
Sara Hosseini, Ingo Hahn
2020 — conf
Two-level Topology Optimization of an Electromagnetic Actuator Based on Genetic Algorithm and Neighbourhood Method.
ICIT
Shabnam Ruzbehi, Ingo Hahn
2019 C conf
Axially Stacked Multiphase Flux Reversal Machine.
IECON
Jaeho Ryu, Ingo Hahn
2019 — conf
Different Iron Loss Models for Electrical Steel Sheets considering Harmonic Flux Signals.
ISIE
Matthias Stiller, Ingo Hahn
2019 — conf
Nonlinear Optimization of Energy Consumption in Trajectory Planning of a Single-axis Electrical Drive.
ISIE
Sara Hosseini, Ingo Hahn
2019 C conf
Resistance- and Inductance-Based Self-Sensing Control using Short-Circuited Windings on the Rotor of a SPMSM.
IECON
Christoph Hittinger, Ingo Hahn
2019 — conf
Short-Circuited Rotor Windings for Improving the Electromagnetic Saliency for Inductance- and Resistance-Based Self-Sensing Control.
ISIE
Christoph Hittinger, Ingo Hahn
2019 — conf
Structural Optimization of an Electromagnetic Actuator Based on Genetic Algorithm, Greedy Search and Their Combination.
ISIE
Shabnam Ruzbehi, Ingo Hahn
2019 C conf
Torque Harmonics Minimization of Double-Stage Magnetic Gear Transmission System.
IECON
Andrea Floris, Alessandro Serpi, Alfonso Damiano, Ingo Hahn
2018 C conf
Experimental Verification of a Passively Cooled Large Air-Gap 6/8-Flux-Switching Permanent Magnet Machine Including Manufacturing.
IECON
Andreas Lindner, Ingo Hahn
2017 C conf
Investigation on different pole configurations of an outer rotor integrated magnetic gear.
IECON
Dominik Thyroff, Ingo Hahn
2017 C conf
Modeling of an IPMSM with short-circuited rotor winding for sensorless position estimation by FEA using the frozen permeability method.
IECON
Christoph Hittinger, Ingo Hahn
2016 C conf
Alternative ways of cooling an e-core flux-switching permanent magnet machine with large air-gap.
IECON
Andreas Lindner, Ingo Hahn
2015 C conf
Improved accuracy of sensorless position estimation by combining resistance- and inductance-based saliency tracking.
IECON
Johannes Graus, Ingo Hahn
2015 C conf
Modeling integrated magnetic gears using a magnetic equivalent circuit.
IECON
Dominik Thyroff, Stefan Meier, Ingo Hahn
2015 C conf
Self-sensing control of permanent-magnet synchronous machines with multiple saliencies using pulse-voltage-injection.
IAS
Lei Chen, Gunther Götting, Simon Dietrich, Ingo Hahn
2014 C conf
Measurement of magnetic properties of steel at high temperatures.
IECON
Andreas Boehm, Ingo Hahn
2014 C conf
Modeling single and double stator axial eddy current brakes considering current displacement, magnetic leakage, fringing and saturation using coupled electric and magnetic equivalent circuits.
IECON
Stefan Meier, Ingo Hahn
2014 C conf
Sensorless capability of an interior permanent magnet synchronous machine with a short-circuited rotor winding.
IECON
Johannes Graus, Ingo Hahn
2014 C conf
Simulation of a toroidal wound flux-switching permanent magnet machine.
IECON
Andreas Lindner, Ingo Hahn
2013 C conf
A simple method for the parameter identification of the Jiles-Atherton model using only symmetric hysteresis loops.
IECON
Andreas Lindner, Ingo Hahn, Andreas Boehm