Hayato Yoshioka

20 papers Journal 20
YearRankTypeTitle / Venue / Authors
2026 J jnl
Velocity Profile Generation for Industrial Robots Considering Natural Frequency Variations.
Int. J. Autom. Technol.
Shingo Tajima, Kazuya Miyashita, Hayato Yoshioka
2025 J jnl
Editorial: Production Technologies at the End of the First Quarter of the 21st Century.
Int. J. Autom. Technol.
Hayato Yoshioka, Yasuhiro Kakinuma
2025 J jnl
Flexible 5-Axis Machining with Toolpath Compensation Based on Workpiece Setting Error.
Int. J. Autom. Technol.
Daisuke Narita, Zongwei Ren, Hayato Yoshioka
2024 J jnl
Machine-Learning-Based Model Parameter Identification for Cutting Force Estimation.
Int. J. Autom. Technol.
Junichi Kouguchi, Shingo Tajima, Hayato Yoshioka
2023 J jnl
Editorial: the Latest Machine Tool and Manufacturing Technologies.
Int. J. Autom. Technol.
Hayato Yoshioka
2023 J jnl
Posture Optimization in Robot Machining with Kinematic Redundancy for High-Precision Positioning.
Int. J. Autom. Technol.
Shingo Tajima, Satoshi Iwamoto, Hayato Yoshioka
2022 J jnl
Reduction of the Influence of Non-Repeatable Run-Out in
Int. J. Autom. Technol.
Yuta Showa, Hayato Yoshioka
2021 J jnl
High-Precision Mobile Robotic Manipulator for Reconfigurable Manufacturing Systems.
Int. J. Autom. Technol.
Shinichi Inoue, Akihisa Urata, Takumi Kodama, Tobias Huwer, Yuya Maruyama, Sho Fujita, Hidenori Shinno, Hayato Yoshioka
2021 J jnl
Kinematic Tool-Path Smoothing for 6-Axis Industrial Machining Robots.
Int. J. Autom. Technol.
Shingo Tajima, Satoshi Iwamoto, Hayato Yoshioka
2019 J jnl
Ball Burnishing of Mg Alloy Using a Newly Developed Burnishing Tool with On-Machine Force Control.
Int. J. Autom. Technol.
Chenyao Cao, Jiang Zhu, Tomohisa Tanaka, Fang-Jung Shiou, Shunichi Sawada, Hayato Yoshioka
2019 J jnl
Editorial: the Latest Machine Tool Technologies and Manufacturing Processes.
Int. J. Autom. Technol.
Yohichi Nakao, Hayato Yoshioka
2019 J jnl
Tool Orientation Angle Optimization for a Multi-Axis Robotic Milling System.
Int. J. Autom. Technol.
Leandro Batista da Silva, Hayato Yoshioka, Hidenori Shinno, Jiang Zhu
2016 J jnl
On-Machine Surface Texture Measuring System Using Laser Speckle Pattern Analysis.
Int. J. Autom. Technol.
Motochika Shimizu, Hiroshi Sawano, Hayato Yoshioka, Hidenori Shinno
2015 J jnl
A Low-Profile Planar Motion Table System Driven by Steel Belt.
Int. J. Autom. Technol.
Hayato Yoshioka, Hidenori Shinno, Hiroshi Sawano
2013 J jnl
A Framework for Systematizing Machine Tool Engineering.
Int. J. Autom. Technol.
Hidenori Shinno, Hayato Yoshioka, Hiroshi Sawano
2011 J jnl
A Proposed Ultraprecision Machining Process Monitoring Method Using Causal Network Model of Air Spindle System.
Int. J. Autom. Technol.
Hiroshi Sawano, Ryosuke Kobayashi, Hayato Yoshioka, Hidenori Shinno
2011 J jnl
Design Concept and Structural Configuration of Advanced Nano-Pattern Generator with Large Work Area "ANGEL".
Int. J. Autom. Technol.
Hayato Yoshioka, Hidenori Shinno
2011 J jnl
On-Machine Optical Surface Profile Measuring System for Nano-Machining.
Int. J. Autom. Technol.
Hiroshi Sawano, Motohiro Takahashi, Hayato Yoshioka, Hidenori Shinno, Kimiyuki Mitsui
2009 J jnl
Status Monitoring of Ultraprecision Machining Using Micro Thermo Sensor and AE Sensor.
Int. J. Autom. Technol.
Hayato Yoshioka, Mamoru Hayashi, Hidenori Shinno
2008 J jnl
Design and Nanomotion Control of a Noncontact Stage with Squeeze Bearings.
Int. J. Autom. Technol.
Hayato Yoshioka, Toshimichi Gokan, Hidenori Shinno