Giovanni Betta

62 papers Journal 37Unranked 25
YearRankTypeTitle / Venue / Authors
2025 — conf
On the Feasibility of LoRaWAN Communication in a Smart Road Sensor Network.
MetroAutomotive
Giovanni Betta, Domenico Capriglione, Luigi Ferrigno, Gianfranco Miele, Keerthana Velusamy
2024 — conf
S-Parameter Analysis of Age Testing Effects on FR4-Based Printed Circuit Boards up to 10 GHz.
M&N
Lewis Manning, Martin J. Salter, Martin Wickham, Ana Robador, Osman Sibonjic, Sani Sarcevic, Semir Cohodarevic, Giovanni Betta, Domenico Capriglione, Gianfranco Miele
2024 — conf
The Impact of Energy Measurement in Fault Detection: A Preliminary Analysis of Load Profiling Capability.
I2MTC
Luca Tari, Giovanni Betta, Luigi Ferrigno, Antonello Monti, Ferdinanda Ponci
2023 — conf
Human exposure to 5G systems: experimental analysis and measurement issues in FR1 and FR2 operating bands.
I2MTC
Giovanni Betta, Domenico Capriglione, Gianni Cerro, Gianfranco Miele, Sangin Qahtan Wali, M. Ruttner, Aduwati Sali, Darko Suka
2022 — conf
5G DSS communications: pilot signals' variability analysis from measurements on the field.
I2MTC
Giovanni Betta, Domenico Capriglione, Gianni Cerro, Gianfranco Miele, Marco Donald Migliore, Darko Suka
2022 — conf
Coronavirus Label-Free Immunosensor: Preliminary Results.
AISEM
Rocco Cancelliere, Laura Micheli, Elisabetta Suffredini, Stefano Bellucci, Giovanni Betta, Luigi Ferrigno, Antonio Maffucci, Gianfranco Miele
2022 — conf
Experimental analysis of 5G pilot signals' variability in urban scenarios.
M&N
Giovanni Betta, Domenico Capriglione, Gianni Cerro, Gianfranco Miele, Marco Donald Migliore, Darko Suka
2022 J jnl
Stress Testing for Performance Analysis of Orientation Estimation Algorithms.
IEEE Trans. Instrum. Meas.
Giovanni Betta, Domenico Capriglione, Marco Carratù, Marcantonio Catelani, Lorenzo Ciani, Gabriele Patrizi, Antonio Pietrosanto, Paolo Sommella
2022 — conf
Temperature stress tests on low-cost IMU systems: Analysis and first proposal for enhancing performance.
I2MTC
Gabriele Patrizi, Marcantonio Catelani, Lorenzo Ciani, Marco Carratù, Antonio Pietrosanto, Paolo Sommella, Giovanni Betta, Domenico Capriglione
2021 — conf
Characterization of 3D Image-Based Biometric Systems in Dynamic Acquisition Conditions.
I2MTC
Giovanni Betta, Domenico Capriglione, Marzia Salone D'Amata, Consolatina Liguori, Emanuele Zappa
2021 J jnl
Human Exposure to 4G LTE Systems: Enhancing the Reliability of EMF Extrapolation Techniques Based on Spectrum Analyzer Measurements.
IEEE Trans. Instrum. Meas.
Giovanni Betta, Domenico Capriglione, Gianni Cerro, Gianfranco Miele, Marzia Salone D'Amata
2021 J jnl
LTE Human Exposure Evaluation: Maximum RF Field Strength Extrapolation Technique Repeatability Analysis.
IEEE Trans. Instrum. Meas.
Andrea Bernieri, Giovanni Betta, Domenico Capriglione, Gianni Cerro, Gianfranco Miele, Marzia Salone D'Amata
2021 — conf
Repeatability analysis of decoder-based EMF exposure measurements in LTE cellular systems.
I2MTC
Giovanni Betta, Domenico Capriglione, Gianfranco Miele, Marco Donald Migliore, Marzia Salone D'Amata, Gianni Cerro
2020 J jnl
On the Measurement of Human Exposure to Cellular Networks.
IEEE Instrum. Meas. Mag.
Giovanni Betta, Domenico Capriglione, Gianni Cerro, Gianfranco Miele, Marzia Salone D'Amata, Darko Suka, Predrag V. Pejovic, Mirjana Simic-Pejovic
2020 — conf
On the Reliability of Extrapolation Techniques for Verifying the Compliance of LTE Cellular Systems with RF Human Exposure Limits.
I2MTC
Giovanni Betta, Gianni Cerro, Gianfranco Miele, Marzia Salone D'Amata, Domenico Capriglione
2019 J jnl
Contaminants detection and classification through a customized IoT-based platform: A case study.
IEEE Instrum. Meas. Mag.
Giovanni Betta, Gianni Cerro, Marco Ferdinandi, Luigi Ferrigno, Mario Molinara
2019 — conf
Experimental Comparison of Extrapolation Techniques for 24-Hours Electromagnetic Fields Human Exposure Evaluation to UMTS and LTE Base Stations.
M&N
Andrea Bernieri, Giovanni Betta, Gianni Cerro, Gianfranco Miele, Domenico Capriglione
2018 — conf
Characterization of a TMR Sensor for EC-NDT Applications.
Sensors
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca, Antonio Rasile
2018 — conf
ECT probe improvement for in-service non-destructive testing on conductive materials.
I2MTC
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca, Antonio Rasile
2018 J jnl
Fast Eddy Current Testing Defect Classification Using Lissajous Figures.
IEEE Trans. Instrum. Meas.
Gianni D'Angelo, Marco Laracca, Salvatore Rampone, Giovanni Betta
2018 — conf
Improvement of the Frequency Behavior of an EC-NDT Inspection System.
Sensors
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca, Antonio Rasile
2017 — conf
Sensitivity analysis of influence quantities on signal-to-noise ratio in face-based recognition systems.
I2MTC
Giovanni Betta, Domenico Capriglione, Mariella Corvino, Consolatina Liguori, Paolo Sommella
2016 — conf
Improving the Performance of an AMR-Based Current Transducer for Metering Applications.
Sensors
Giovanni Betta, Domenico Capriglione, Luigi Ferrigno, Antonio Rasile
2015 J jnl
A Proposal for the Management of the Measurement Uncertainty in Classification and Recognition Problems.
IEEE Trans. Instrum. Meas.
Giovanni Betta, Domenico Capriglione, Mariella Corvino, Consolatina Liguori, Alfredo Paolillo
2014 J jnl
An Experimental Setup for the Calibration of Acoustic Antenna.
IEEE Trans. Instrum. Meas.
Orsola Petrella, Salvatore Ameduri, Vincenzo Quaranta, Giovanni Betta, Marco Laracca
2014 — conf
Managing the uncertainty for face classification with 3D features.
I2MTC
Giovanni Betta, Domenico Capriglione, Michele Gasparetto, Emanuele Zappa, Consolatina Liguori, Alfredo Paolillo
2014 J jnl
Multifrequency Excitation and Support Vector Machine Regressor for ECT Defect Characterization.
IEEE Trans. Instrum. Meas.
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca, Stefano Mastrostefano
2014 — conf
Optimized complex signals for Eddy Current Testing.
I2MTC
Giovanni Betta, Luigi Ferrigno, Marco Laracca, Pietro Burrascano, Marco Ricci
2014 — conf
Proposal and analysis of new algorithms for wideband spectrum sensing in cognitive radio.
I2MTC
Leopoldo Angrisani, Giovanni Betta, Domenico Capriglione, Gianni Cerro, Luigi Ferrigno, Gianfranco Miele
2013 — conf
A novel biaxial probe implementing multifrequency excitation and SVM processing for NDT.
I2MTC
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca
2013 J jnl
Cost-Effective FPGA Instrument for Harmonic and Interharmonic Monitoring.
IEEE Trans. Instrum. Meas.
Giovanni Betta, Luigi Ferrigno, Marco Laracca
2013 J jnl
Crack Depth Estimation by Using a Multi-Frequency ECT Method.
IEEE Trans. Instrum. Meas.
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca
2013 J jnl
Face Based Recognition Algorithms: A First Step Toward a Metrological Characterization.
IEEE Trans. Instrum. Meas.
Giovanni Betta, Domenico Capriglione, Mariella Corvino, Consolatina Liguori, Alfredo Paolillo
2013 — conf
Face based recognition algorithms: The use of uncertainty in the classification.
I2MTC
Giovanni Betta, Domenico Capriglione, Mariella Corvino, Consolatina Liguori, Alfredo Paolillo
2013 — conf
Modelling, parametric analysis, and optimization of an experimental set-up for acoustic antenna calibration.
I2MTC
Orsola Petrella, Salvatore Ameduri, Vincenzo Quaranta, Giovanni Betta, Marco Laracca
2012 J jnl
GMR-Based ECT Instrument for Detection and Characterization of Crack on a Planar Specimen: A Hand-Held Solution.
IEEE Trans. Instrum. Meas.
Giovanni Betta, Luigi Ferrigno, Marco Laracca
2011 J jnl
The accurate calibration of EMC antennas in compact chambers - Measurements and uncertainty evaluations.
Comput. Stand. Interfaces
Giovanni Betta, Domenico Capriglione, Carlo F. M. Carobbi, Marco Donald Migliore
2010 J jnl
Influence of Wi-Fi Computer Interfaces on Measurement Apparatuses.
IEEE Trans. Instrum. Meas.
Giovanni Betta, Domenico Capriglione, Luigi Ferrigno, Gianfranco Miele
2008 J jnl
A Methodology to Test Instrument Software: An Automotive Diagnostic System Application.
IEEE Trans. Instrum. Meas.
Giovanni Betta, Domenico Capriglione, Antonio Pietrosanto, Paolo Sommella
2008 J jnl
A Statistical Approach for Improving the Performance of a Testing Methodology for Measurement Software.
IEEE Trans. Instrum. Meas.
Giovanni Betta, Domenico Capriglione, Antonio Pietrosanto, Paolo Sommella
2008 J jnl
Experimental Investigation of the Electromagnetic Interference of ZigBee Transmitters on Measurement Instruments.
IEEE Trans. Instrum. Meas.
Giovanni Betta, Domenico Capriglione, Luigi Ferrigno, Gianfranco Miele
2007 — conf
Influence of Wi-Fi computer interfaces on RF measurement systems.
VECIMS
Giovanni Betta, Domenico Capriglione, Luigi Ferrigno, Gianfranco Miele
2006 J jnl
Reproducibility and Uncertainty of Conducted Emission Measurements for Adjustable-Speed Electrical Power Drive Characterization.
IEEE Trans. Instrum. Meas.
Giovanni Betta, Domenico Capriglione, Marco Laracca
2005 — conf
SVM-based approach for instrument fault accomodation in automotive systems.
VECIMS
Giovanni Betta, Andrea Bernieri, Domenico Capriglione, Mario Molinara
2004 J jnl
A biaxial probe for nondestructive testing on conductive materials.
IEEE Trans. Instrum. Meas.
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca
2004 J jnl
An automated self-calibrated instrument for nondestructive testing on conductive materials.
IEEE Trans. Instrum. Meas.
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca
2004 J jnl
Evaluation of the measurement uncertainties in the conducted emissions from adjustable speed electrical power drive systems.
IEEE Trans. Instrum. Meas.
Giovanni Betta, Domenico Capriglione, G. Tomasso Tomasso
2004 J jnl
Uncertainty evaluation in algorithms with conditional statement.
IEEE Trans. Instrum. Meas.
Giovanni Betta, Consolatina Liguori, Antonio Pietrosanto
2003 J jnl
Improving nondestructive testing probe performance by digital processing techniques.
IEEE Trans. Instrum. Meas.
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno
2002 J jnl
A DSP-based FFT-analyzer for the fault diagnosis of rotating machine based on vibration analysis.
IEEE Trans. Instrum. Meas.
Giovanni Betta, Consolatina Liguori, Alfredo Paolillo, Antonio Pietrosanto
2002 J jnl
Characterization of an eddy-current-based system for nondestructive testing.
IEEE Trans. Instrum. Meas.
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno
2001 J jnl
A multi-application FFT analyzer based on a DSP architecture.
IEEE Trans. Instrum. Meas.
Giovanni Betta, Consolatina Liguori, Antonio Pietrosanto
2001 J jnl
An enhanced fiber-optic temperature sensor system for power transformer monitoring.
IEEE Trans. Instrum. Meas.
Giovanni Betta, Antonio Pietrosanto, Antonio Scaglione
2000 J jnl
A measurement system based on magnetic sensors for nondestructive testing.
IEEE Trans. Instrum. Meas.
Andrea Bernieri, Giovanni Betta, Guglielmo Rubinacci, Fabio Villone
2000 J jnl
An intrinsic fiber optic temperature sensor.
IEEE Trans. Instrum. Meas.
Giovanni Betta, Antonio Pietrosanto
2000 J jnl
Instrument fault detection and isolation: state of the art and new research trends.
IEEE Trans. Instrum. Meas.
Giovanni Betta, Antonio Pietrosanto
2000 J jnl
Temperature measurement by multifiber optical sensor.
IEEE Trans. Instrum. Meas.
Giovanni Betta, Antonio Pietrosanto, Antonio Scaglione
1998 J jnl
A Gray-code-based fiber optic liquid level transducer.
IEEE Trans. Instrum. Meas.
Giovanni Betta, Antonio Pietrosanto, Antonio Scaglione
1998 J jnl
An advanced neural-network-based instrument fault detection and isolation scheme.
IEEE Trans. Instrum. Meas.
Giovanni Betta, Consolatina Liguori, Antonio Pietrosanto
1998 J jnl
An intelligent FFT-analyzer.
IEEE Trans. Instrum. Meas.
Giovanni Betta, Massimo D'Apuzzo, Consolatina Liguori, Antonio Pietrosanto
1998 J jnl
Comparison between IFDI schemes based on expert systems and neural networks.
IEEE Trans. Instrum. Meas.
Giovanni Betta, Consolatina Liguori, Antonio Pietrosanto
1998 J jnl
Microcontroller-based performance enhancement of an optical fiber level transducer.
IEEE Trans. Instrum. Meas.
Giovanni Betta, Antonio Pietrosanto, Antonio Scaglione