Christoph M. Hackl

71 papers B 1C 11Journal 35Unranked 24
YearRankTypeTitle / Venue / Authors
2025 — conf
Identifying key attacks on an IEEE 9-Bus System by leveraging the MITRE ATT&CK ICS Matrix.
e-Energy
Marius Biebel, Zhao Song, Thomas Schreck, Christoph M. Hackl
2025 J jnl
Rotor-Switching-Signal Based Sensorless Control Method for Electrically Excited Synchronous Machines.
IEEE Trans. Ind. Electron.
Yuebin Pang, Jovan M. Knezevic, Daniel Glose, Christoph M. Hackl
2024 — conf
Asymptotic Tracking by Funnel Control with Internal Models.
ECC
Thomas Berger, Christoph M. Hackl, Stephan Trenn
2024 — conf
Extended State Observer Based Stator Flux Linkage Estimation of Nonlinear Synchronous Machines.
ISIE
Seunghun Jang, Bernd Pfeifer, Christoph M. Hackl, Kyunghwan Choi
2024 J jnl
Robust Sensorless Control of Electrically Excited Synchronous Machines Considering Inductance Uncertainties.
IEEE Trans. Ind. Electron.
Yuebin Pang, Jovan M. Knezevic, Daniel Glose, Christoph M. Hackl
2024 J jnl
Sensorless Control of Electrically Excited Synchronous Machines Considering Magnetic Saturation and Flux Linkage Dynamics for Automotive Applications.
IEEE Trans. Ind. Electron.
Yuebin Pang, Jovan M. Knezevic, Daniel Glose, Christoph M. Hackl
2023 — conf
A generic Lyapunov-based Observer for Double-Star-Chopper-Cell/Bridge-Cell Modular-Multilevel-Cascade-Converters.
ISIE
Leonardo Testa, Oliver Kalmbach, Christoph M. Hackl
2023 — conf
A simple disturbance observer for stator flux linkage estimation of nonlinear synchronous machines.
ISIE
Niklas Monzen, Bernd Pfeifer, Christoph M. Hackl
2023 — conf
Artificial neural network based optimal feedforward torque control of electrically excited synchronous machines.
ISIE
Niklas Monzen, Christoph M. Hackl
2023 — conf
Combining virtual synchronous machine and feedforward torque control for doubly-fed induction machine based wind energy conversion systems.
ISIE
Andre Thommessen, Christoph M. Hackl
2023 — conf
I/O-Linearization Based Current Decoupling Control of Modular Multilevel Cascade Converters.
ISIE
Oliver Kalmbach, Christoph M. Hackl
2023 J jnl
Nonlinear Modeling, Identification, and Optimal Feedforward Torque Control of Induction Machines Using Steady-State Machine Maps.
IEEE Trans. Ind. Electron.
Julian Kullick, Christoph M. Hackl
2023 — conf
Nonlinear Three-Phase Reluctance Synchronous Machine Modeling With Extended Torque Equation.
ISIE
Johannes Rossmann, Niklas Monzen, Maarten J. Kamper, Christoph M. Hackl
2022 J jnl
Continuous Control Set Nonlinear Model Predictive Control of Reluctance Synchronous Machines.
IEEE Trans. Control. Syst. Technol.
Andrea Zanelli, Julian Kullick, Hisham M. Eldeeb, Gianluca Frison, Christoph M. Hackl, Moritz Diehl
2022 J jnl
DC-Link Capacitor and Inverter Current Ripples in Anisotropic Synchronous Motor Drives Produced by Synchronous Optimal PWM.
IEEE Trans. Ind. Electron.
Athina Birda, Christoph Grabher, Christoph M. Hackl, Joerg Reuss
2022 J jnl
Multistep Model Predictive Control for Electrical Drives - A Fast Quadratic Programming Solution.
Symmetry
Haotian Xie, Jianming Du, Dongliang Ke, Yingjie He, Fengxiang Wang, Christoph M. Hackl, José Rodríguez, Ralph Kennel
2022 C conf
System Parameter-free Continuous Control-set Predictive Current Control of Synchronous Motors.
IECON
Ismaele Diego De Martin, Fabio Tinazzi, Mauro Zigliotto, Christoph M. Hackl
2021 — conf
3D-Modulation and PI State-Feedback Control of Voltage Source Inverters with Split DC-Link.
ISIE
Simon Krüner, Zhao Song, Christoph M. Hackl
2021 — conf
Analytic Solutions for Full Operating Range Single-Side ZVS Modulation of Dual Active Bridge Converters.
ISIE
Michael Saegmueller, Christoph M. Hackl, Rolf Witzmann, René Richter
2021 — conf
Generic loss minimization for nonlinear synchronous machines by analytical computation of optimal reference currents considering copper and iron losses.
ICIT
Christoph M. Hackl, Julian Kullick, Niklas Monzen
2021 — conf
Optimal feedforward torque control for nonlinear induction machines considering stator and rotor copper losses and current and voltage limits.
ISIE
Andre Thommessen, Christoph M. Hackl
2021 J jnl
Synchronous Optimal Pulsewidth Modulation for Synchronous Machines With Highly Operating Point Dependent Magnetic Anisotropy.
IEEE Trans. Ind. Electron.
Athina Birda, Joerg Reuss, Christoph M. Hackl
2020 C conf
Analytic Solutions for Minimum Conduction Loss Modulation of Dual Active Bridge Converters Including Frequency Variation.
IECON
Michael Saegmueller, Christoph M. Hackl, Rolf Witzmann, René Richter
2020 C conf
Comparison of IPMSM Parameter Estimation Methods for Motor Efficiency.
IECON
Antonín Glac, Václav Smídl, Zdenek Peroutka, Christoph M. Hackl
2020 C conf
Finite-Set Predictive Control with Disturbance Rejection Capability for PMSGs in Wind Turbine Applications.
IECON
Mohamed Abdelrahem, Ralph Kennel, Christoph M. Hackl, José Rodríguez
2020 — conf
Maximum Power Point Tracking Based Model Predictive Control and Extended Kalman Filter Using Single Voltage Sensor for PV Systems.
ISIE
Mostafa Ahmed, Mohamed Abdelrahem, Ralph Kennel, Christoph M. Hackl
2020 J jnl
Pre- and Postfault Current Control of Dual Three-Phase Reluctance Synchronous Drives.
IEEE Trans. Ind. Electron.
Hisham M. Eldeeb, Ayman S. Abdel-Khalik, Julian Kullick, Christoph M. Hackl
2020 J jnl
Simple Fundamental Current Estimation and Smooth Transition Between Synchronous Optimal PWM and Asynchronous SVM.
IEEE Trans. Ind. Electron.
Athina Birda, Joerg Reuss, Christoph M. Hackl
2020 C conf
Simplified Model Predictive Current Control for Single-Phase Multilevel Inverter.
IECON
Ibrahim Harbi, Mohamed Abdelrahem, Ralph Kennel, Christoph M. Hackl
2019 J jnl
A Framework for Multi-Regional Real-Time Pricing in Distribution Grids.
IEEE Trans. Smart Grid
Kai Zhang, Sarmad Hanif, Christoph M. Hackl, Thomas Hamacher
2019 J jnl
An Integrated Converter and Machine Control System for MMC-Based High-Power Drives.
IEEE Trans. Ind. Electron.
Mauricio Espinoza Mejía, Roberto Cárdenas, Jon C. Clare, Diego E. Soto-Sanchez, Matias Diaz, Enrique Espina, Christoph M. Hackl
2019 J jnl
Continuous Control Set Nonlinear Model Predictive Control of Reluctance Synchronous Machines.
CoRR
Andrea Zanelli, Julian Kullick, Hisham M. Eldeeb, Gianluca Frison, Christoph M. Hackl, Moritz Diehl
2019 J jnl
Decomposition and Equilibrium Achieving Distribution Locational Marginal Prices Using Trust-Region Method.
IEEE Trans. Smart Grid
Sarmad Hanif, Kai Zhang, Christoph M. Hackl, Masoud Barati, Hoay Beng Gooi, Thomas Hamacher
2019 J jnl
Dynamic Modeling of Dual Three-Phase IPMSM Drives With Different Neutral Configurations.
IEEE Trans. Ind. Electron.
Hisham M. Eldeeb, Ayman S. Abdel-Khalik, Christoph M. Hackl
2019 J jnl
Modified second-order generalized integrators with modified frequency locked loop for fast harmonics estimation of distorted single-phase signals.
CoRR
Christoph M. Hackl, Markus Landerer
2019 J jnl
Postfault Full Torque-Speed Exploitation of Dual Three-Phase IPMSM Drives.
IEEE Trans. Ind. Electron.
Hisham M. Eldeeb, Ayman S. Abdel-Khalik, Christoph M. Hackl
2019 J jnl
Scaling of the Drive Train Dynamics of Large-Scale Wind Turbine Systems for Real-Time Emulation in Small-Scale Laboratory Setups.
IEEE Trans. Ind. Electron.
Korbinian Schechner, Christoph M. Hackl
2019 J jnl
Vector Control of a Modular Multilevel Matrix Converter Operating Over the Full Output-Frequency Range.
IEEE Trans. Ind. Electron.
Matias Diaz, Roberto Cárdenas, Mauricio Espinoza, Christoph M. Hackl, Felix Rojas, Jon C. Clare, Patrick Wheeler
2018 J jnl
A unified theory for optimal feedforward torque control of anisotropic synchronous machines.
Int. J. Control
Hisham M. Eldeeb, Christoph M. Hackl, Lorenz Horlbeck, Julian Kullick
2018 — conf
Enhanced Electromechanical Modeling of Asymmetrical Dual Three-Phase IPMSM Drives.
ISIE
Hisham M. Eldeeb, Mohamed Abdelrahem, Christoph M. Hackl, Ayman Samy Abdel-Khalik
2018 J jnl
Full- & Reduced-Order State-Space Modeling of Wind Turbine Systems with Permanent-Magnet Synchronous Generator.
CoRR
Christoph M. Hackl, Martin Pfeifer, Korbinian Schechner, Pol Jané-Soneira, Sören Hohmann
2018 J jnl
Generic machine identification and maximum efficiency operation of induction machines.
CoRR
Julian Kullick, Christoph M. Hackl
2018 J jnl
Modeling and control of permanent-magnet synchronous generators under open-switch converter faults.
CoRR
Christoph M. Hackl, Urs Pecha, Korbinian Schechner
2018 J jnl
Multicopter With Series Connected Propeller Drives.
IEEE Trans. Control. Syst. Technol.
Florian Bauer, Christoph M. Hackl, Keyue Ma Smedley, Ralph M. Kennel
2018 J jnl
Speed-sensorless state feedback control of induction machines with LC filter.
CoRR
Julian Kullick, Christoph M. Hackl
2017 J jnl
Modeling and control of modern wind turbine systems: An introduction.
CoRR
Christian Dirscherl, Christoph M. Hackl, Korbinian Schechner
2016 C conf
"Virtual"-power-hardware-in-the-loop simulations for crosswind kite power with ground generation.
ACC
Florian Bauer, Christoph M. Hackl, Keyue Smedley, Ralph M. Kennel
2016 — conf
Analytical solution for the MTPV hyperbola including the stator resistance.
ICIT
Lorenz Horlbeck, Christoph M. Hackl
2016 — conf
Current control of reluctance synchronous machines with online adjustment of the controller parameters.
ISIE
Christoph M. Hackl, Maarten J. Kamper, Julian Kullick, J. Mitchell
2016 J jnl
Non-ideal torque control of wind turbine systems: Impacts on annual energy production.
CoRR
Christoph M. Hackl, Korbinian Schechner
2016 J jnl
On the equivalence of proportional-integral and proportional-resonant controllers with anti-windup.
CoRR
Christoph M. Hackl
2016 J jnl
On the optimal feedforward torque control problem of anisotropic synchronous machines: Quadrics, quartics and analytical solutions.
CoRR
Hisham M. Eldeeb, Christoph M. Hackl, Lorenz Horlbeck, Julian Kullick
2016 C conf
Proportional-resonant controller design for quasi-Z-source inverters with LC filters.
IECON
Ayman Ayad, Mohamed Hashem, Christoph M. Hackl, Ralph Kennel
2015 — conf
Current PI-funnel control with anti-windup for synchronous machines.
CDC
Christoph M. Hackl
2015 — conf
Explicit model predictive control with disturbance observer for grid-connected voltage source power converters.
ICIT
Christian Dirscherl, Christoph M. Hackl, Korbinian Schechner
2015 J jnl
Nonlinear PI current control of reluctance synchronous machines.
CoRR
Christoph M. Hackl, Julian Kullick, Maarten J. Kamper, J. Mitchell
2015 C conf
Pole-placement based nonlinear state-feedback control of the DC-link voltage in grid-connected voltage source power converters: A preliminary study.
CCA
Christian Dirscherl, Christoph M. Hackl, Korbinian Schechner
2015 J jnl
Predictive Control With Novel Virtual-Flux Estimation for Back-to-Back Power Converters.
IEEE Trans. Ind. Electron.
Zhenbin Zhang, He Xu, Ming Xue, Zhe Chen, Tongjing Sun, Ralph Kennel, Christoph M. Hackl
2015 — conf
Speed funnel control with disturbance observer for wind turbine systems with elastic shaft.
CDC
Christoph M. Hackl
2015 C conf
State-feedback controller and observer design for grid-connected voltage source power converters with LCL-filter.
CCA
Christian Dirscherl, Josef Fessler, Christoph M. Hackl, Hanko Ipach
2014 C conf
Funnel control for wind turbine systems.
CCA
Christoph M. Hackl
2013 J jnl
Funnel Control for Systems with Relative Degree Two.
SIAM J. Control. Optim.
Christoph M. Hackl, Norman Hopfe, Achim Ilchmann, Markus Mueller, Stephan Trenn
2013 — conf
Funnel control with disturbance observer for two-mass systems.
CDC
Christoph M. Hackl
2013 — conf
PI-funnel control with anti-windup and its application to speed control of electrical drives.
CDC
Christoph M. Hackl
2012 C conf
Position funnel control with linear internal model.
CCA
Christoph M. Hackl, Ralph Kennel
2011 — conf
Funnel control in mechatronics: An overview.
CDC/ECC
Christoph M. Hackl, A. G. Hofmann, Ralph Kennel
2011 J jnl
High-gain adaptive position control.
Int. J. Control
Christoph M. Hackl
2009 J jnl
Comments on "Backpropagation Algorithms for a Broad Class of Dynamic Networks".
IEEE Trans. Neural Networks
Christian Endisch, Peter Stolze, Christoph M. Hackl, Dierk Schröder
2009 J jnl
Contributions to non-identifier based adaptive control in mechatronics.
Robotics Auton. Syst.
Christoph M. Hackl, Christian Endisch, Dierk Schröder
2009 B conf
Levenberg-Marquardt-based OBS Algorithm using Adaptive Pruning Interval for System Identification with Dynamic Neural Networks.
SMC
Christian Endisch, Peter Stolze, Peter Endisch, Christoph M. Hackl, Ralph Kennel
2007 — conf
Optimal Brain Surgeon for General Dynamic Neural Networks.
EPIA Workshops
Christian Endisch, Christoph M. Hackl, Dierk Schröder