Berend Denkena

91 papers C 1Journal 78Unranked 11
YearRankTypeTitle / Venue / Authors
2024 J jnl
Shape error prediction in 5-axis machining using graph neural networks.
CoRR
Julia Huuk, Abheek Dhingra, Eirini Ntoutsi, Berend Denkena
2022 J jnl
A regeneration process chain with an integrated decision support system for individual regeneration processes based on a virtual twin.
Int. J. Prod. Res.
Carolin Kellenbrink, Nicolas Nübel, André Schnabel, Philipp Gilge, Joerg R. Seume, Berend Denkena, Stefan Helber
2022 — conf
In Situ Resistance Trimming of Directly Deposited Thin-Film Strain Gauges.
IEEE SENSORS
Rico Ottermann, Shuowen Zhang, Berend Denkena, Heinrich Klemme, Dennis Kowalke, Michael Korbacher, Folke Dencker, Marc Christopher Wurz
2022 — conf
Intelligent Manufacturing Cell for Implants.
IEEM
Berend Denkena, Heinrich Klemme, Sebastian Kaiser, Maruan Shanib
2022 — conf
Machine Learning Based Reconstruction of Process Forces.
SYSINT
Berend Denkena, Heinrich Klemme, Dennis Stoppel
2019 J jnl
Analysis of potentials to improve the machining of hybrid workpieces.
Prod. Eng.
Berend Denkena, Benjamin Bergmann, Bernd Breidenstein, Vannila Prasanthan, Matthias Witt
2019 J jnl
Material identification based on machine-learning algorithms for hybrid workpieces during cylindrical operations.
J. Intell. Manuf.
Berend Denkena, Benjamin Bergmann, Matthias Witt
2019 J jnl
Prediction of surface residual stress and hardness induced by ball burnishing through neural networks.
Int. J. Manuf. Res.
Frederico C. Magalhães, Carlos E. H. Ventura, Alexandre M. Abrão, Berend Denkena, Bernd Breidenstein, Kolja Meyer
2019 J jnl
Surface integrity of turned laser-welded hybrid shafts.
Prod. Eng.
Berend Denkena, Bernd Breidenstein, Thilo Grove, Vannila Prasanthan, Ludger Overmeyer, Sarah Nothdurft, Stefan Kaierle, Jörg Wallaschek, Jens Twiefel, H. Ohrdes, Hans Jürgen Maier, Thomas Hassel, Maximilian Mildebrath
2018 J jnl
A new process chain for recycling of cemented carbide milling tools.
Prod. Eng.
Berend Denkena, Marc-André Dittrich, Yanwei Liu
2018 J jnl
Frictionally damped tool holder for long projection cutting tools.
Prod. Eng.
Berend Denkena, Benjamin Bergmann, Christian Teige
2018 J jnl
Highly Dynamic Spindle Integrated Magnet Actuators for Chatter Reduction.
Int. J. Autom. Technol.
Jan Königsberg, Jan Reiners, Bernd Ponick, Berend Denkena, Benjamin Bergmann
2018 J jnl
Production-based design of a hybrid load introduction element for thin-walled CFRP Structures.
Prod. Eng.
Lukas Groß, Alexander Herwig, David C. Berg, Carsten Schmidt, Berend Denkena, Peter Horst, Dieter Meiners
2017 J jnl
Holistic process planning chain for robot machining.
Prod. Eng.
Berend Denkena, Jan Brüning, Lars Windels, Dirk Euhus, Stefan Kirsch, Daniel Overbeck, Thomas Lepper
2017 J jnl
Influence of asymmetric cutting edge roundings on surface topography.
Prod. Eng.
O. Maiss, Thilo Grove, Berend Denkena
2017 J jnl
New tool concept for grinding a plateau-like surface for tribological applications.
Prod. Eng.
Berend Denkena, Thilo Grove, O. Maiss, V. Suntharakumaran
2017 J jnl
Performance of a piezo-hydraulic fine positioning device: Experimental analyses with a scaled model.
Prod. Eng.
Berend Denkena, Lars Hülsemeyer, Maik Bergmeier
2017 J jnl
Smart and energy-efficient dust suction concept for milling of fibre-reinforced plastics.
Prod. Eng.
Berend Denkena, Marc-André Dittrich, B.-H. Rahner
2017 J jnl
Temperature and energy partition for grinding of mixed oxide ceramics.
Prod. Eng.
Berend Denkena, L. Gottwik, Thilo Grove, A. Wippermann
2016 J jnl
Influence of PVD-coating technology and pretreatments on residual stresses for sheet-bulk metal forming tools.
Prod. Eng.
Wolfgang Tillmann, Dominic Stangier, Berend Denkena, Thilo Grove, Henning Lucas
2016 J jnl
Influence of the residual stress state of coatings on the wear behavior in external turning of AISI 4140 and Ti-6Al-4V.
Prod. Eng.
Bernd Breidenstein, Berend Denkena, Jörg Vetter, Björn Richter
2016 J jnl
Repairing parts from nickel base material alloy by laser cladding and ball end milling.
Prod. Eng.
Volker Böß, Berend Denkena, Volker Wesling, Stefan Kaierle, Felix Rust, Dennis Nespor, Boris Rottwinkel
2016 J jnl
Simulation-based planning and evaluation of personnel scheduling in knowledge-intensive production systems.
Prod. Eng.
Berend Denkena, Marc-André Dittrich, Florian Winter, Christian Wagener
2016 J jnl
Tribological measures for controlling material flow in sheet-bulk metal forming.
Prod. Eng.
Maria Löffler, Kolja Andreas, Ulf Engel, Robert Schulte, Daniel Gröbel, Eugen Krebs, Dennis Freiburg, Dirk Biermann, Dominic Stangier, Wolfgang Tillmann, Tim Weikert, Sandro Wartzack, Stephan Tremmel, Henning Lucas, Berend Denkena, Marion Merklein
2015 J jnl
Advanced Control Strategies for Active Vibration Suppression in Laser Cutting Machines.
Int. J. Autom. Technol.
Berend Denkena, Martin Eckl, Thomas Lepper
2015 J jnl
Design and analysis of a 2-DOF synchronous planar drive for machine tools.
Prod. Eng.
Berend Denkena, J. Friederichs, Jonathan Fuchs
2015 J jnl
Flow stress and temperature considerations for orthogonal cutting of an aluminum-alloyed UHC-steel.
Prod. Eng.
Berend Denkena, Thilo Grove, Marc-André Dittrich
2015 J jnl
Gear profile grinding with metal bonded CBN tools.
Prod. Eng.
Berend Denkena, D. Preising, Stephan Woiwode
2015 J jnl
Influence of the cutting edge radius on surface integrity in hard turning of roller bearing inner rings.
Prod. Eng.
Berend Denkena, Thilo Grove, O. Maiss
2015 J jnl
Kinematic analysis of the cutting speed for continuous generating grinding.
Prod. Eng.
Berend Denkena, Jens Köhler, Andreas Schindler, Stephan Woiwode
2015 J jnl
Modeling and compensation of the interactions between geometrical errors and drive currents in directly driven gantry machine tools.
Prod. Eng.
Berend Denkena, K. M. Litwinski, Martin Eckl
2015 J jnl
Significant influence factors on the grinding tool wear and cutting mechanisms during grinding of PCBN inserts.
Prod. Eng.
Berend Denkena, Thilo Grove, L. Behrens
2014 J jnl
Application of methods for ecological optimization of crank shaft forging process.
Prod. Eng.
Bernd-Arno Behrens, Berend Denkena, Hong-Seok Park, Jan Henjes, Stefan Kröning, Timur Yilkiran, Andreas Klassen
2014 J jnl
Behavior of the magnetic abrasive tool for cutting edge preparation of cemented carbide end mills.
Prod. Eng.
Berend Denkena, Jens Köhler, Andreas Schindler
2014 J jnl
Chip formation and modeling of dynamic force behavior in machining polycrystalline iron-aluminum.
Prod. Eng.
Berend Denkena, Hendrik Stiffel, Eike Hasselberg, Dennis Nespor
2014 J jnl
Chip formation and tool wear in turning of aluminum-alloyed UHC-steels.
Prod. Eng.
Berend Denkena, Jens Köhler, Marc-André Dittrich
2014 J jnl
Dressing of vitrified bonded CBN tools for continuous generating grinding.
Prod. Eng.
Berend Denkena, Jens Köhler, Stephan Woiwode
2014 J jnl
Interpretation and optimization of material flow via system behavior reconstruction.
Prod. Eng.
Berend Denkena, Barbara Dengler, Karl Doreth, Claudia Krull, Graham Horton
2014 J jnl
Modeling and simulation of milling processes including process damping effects.
Prod. Eng.
Berend Denkena, Wladimir Bickel, R. Grabowski
2014 J jnl
Surface and subsurface alterations induced by deep rolling of hardened AISI 1060 steel.
Prod. Eng.
Alexandre M. Abrão, Berend Denkena, Bernd Breidenstein, Tobias Mörke
2014 J jnl
Time-oriented pricing for the tool and mould manufacturing industry.
Prod. Eng.
Andrea Nemeti, Berend Denkena
2013 — conf
A Software Architecture to Synchronize Interactivity of Concurrent Simulations in Systems Engineering.
CE
Christian Bartelt, Volker Böß, Jan Brüning, Andreas Rausch, Berend Denkena, Jean Paul Tatou
2013 J jnl
Adaptive Cutting Force Control with a Hybrid Axis System.
Int. J. Autom. Technol.
Berend Denkena, Felix Flöter
2013 J jnl
Competence-based process planning for the workshop production.
Prod. Eng.
Berend Denkena, F. Charlin, M. Merwart
2013 J jnl
Design and analysis of a prototypical sensory Z-slide for machine tools.
Prod. Eng.
Berend Denkena, K. M. Litwinski, Dominik Brouwer, H. Boujnah
2013 J jnl
Product Identification by Machined Micro Patterns.
Int. J. Autom. Technol.
Berend Denkena, Jörn Ostermann, Jens Köhler, Tobias Mörke, Benjamin Spitschan
2013 J jnl
Special issue WGP: "System-integrated intelligence: new challenges for product and production engineering".
Prod. Eng.
Berend Denkena, Jürgen Gausemeier, Bernd Scholz-Reiter
2013 J jnl
XY-table for desktop machine tools based on a new fluidic planar drive.
Prod. Eng.
Berend Denkena, Haydar Kayapinar
2012 J jnl
Adaptive process planning.
Prod. Eng.
Berend Denkena, Leif-Erik Lorenzen, Justin Schmidt
2012 J jnl
Chip formation in grinding: an experimental study.
Prod. Eng.
Berend Denkena, Jens Köhler, Jan Kästner
2012 J jnl
Condition based maintenance planning of highly productive machine tools.
Prod. Eng.
Berend Denkena, Peter Bluemel, Stefan Kroening, Jens Roebbing
2012 J jnl
Development of an advanced micro-positioning system for increasing operation accuracy: consideration of high pressure sealing.
Prod. Eng.
Sabrina Pluemer, Kathrin Voges-Schwieger, Berend Denkena, Bernd-Arno Behrens
2012 J jnl
Flank milling of compliant workpieces with chamfered tools.
Prod. Eng.
Berend Denkena, Wladimir Bickel, Volker Sellmeier
2012 J jnl
Influence of the cutting edge rounding on the chip formation process: Part 1. Investigation of material flow, process forces, and cutting temperature.
Prod. Eng.
Berend Denkena, Jens Köhler, Mesfin Sisay Mengesha
2012 J jnl
Integrative process chain optimization using a Genetic Algorithm.
Prod. Eng.
Berend Denkena, Bernd-Arno Behrens, F. Charlin, Matthias Dannenberg
2012 J jnl
Multicriteria dimensioning of hard-finishing operations regarding cross-process interdependencies.
J. Intell. Manuf.
Berend Denkena, Helge Henning
2012 J jnl
Process stabilization with an adaptronic spindle system.
Prod. Eng.
Berend Denkena, Olaf Gümmer
2012 — conf
Standardized Communication in Simulation of Interacting Machine Tool Components.
CE
Volker Böß, Jan Brüning, Berend Denkena
2011 J jnl
Automated design of fixtures based on FEM simulations.
Int. J. Comput. Aided Eng. Technol.
Berend Denkena, Hans-Christian Möhring, K. M. Litwinski, Dennis Heinisch
2011 J jnl
CAD-based cost calculation of mould cavities.
Prod. Eng.
Berend Denkena, Jan Thomas Schürmeyer, Volker Böß, Rabih Kaddour
2011 J jnl
Dynamic analysis of a motor-integrated method for a higher milling stability.
Prod. Eng.
Berend Denkena, Wladimir Bickel, Bernd Ponick, Judith Emmrich
2011 J jnl
Identification of weak spots in the metrological investigation of dynamic machine behaviour.
Prod. Eng.
Christian Brecher, Berend Denkena, Knut Großmann, Paul Steinmann, Aous Bouabid, Dennis Heinisch, R. Hermes, Michael Löser
2011 J jnl
Linking total costs and benefits of ownership (TCBO) and process chain simulation for integrated assessment of manufacturing technologies and processes.
Prod. Eng.
Berend Denkena, Jan Thomas Schürmeyer, Mark Eikötter
2011 J jnl
Modification of the Tool-Workpiece Contact Conditions to Influence the Tool Wear and Workpiece Loading During Hard Turning.
Int. J. Autom. Technol.
Berend Denkena, Jens Köhler, Roland Meyer, Hendrik Stiffel
2011 J jnl
Optimizing the order processing of customized products using product configuration.
Prod. Eng.
Lars Hvam, Martin Bonev, Berend Denkena, Jan Thomas Schürmeyer, Barbara Dengler
2011 J jnl
Topography prediction of resilient parts after flank milling with chamfered tools.
Prod. Eng.
Berend Denkena, Jens Köhler, Volker Sellmeier, Tobias Mörke
2010 J jnl
Genetics and intelligence: new approaches in production engineering.
Prod. Eng.
Berend Denkena, Helge Henning, Leif-Erik Lorenzen
2010 J jnl
Influence of scaled undeformed sections of cut on strain rate, cutting force and temperature.
Prod. Eng.
Berend Denkena, Luis de Leon, Jens Köhler
2009 J jnl
Grinding of microstructured functional surfaces: a novel strategy for dressing of microprofiles.
Prod. Eng.
Berend Denkena, Luis de Leon, Bo Wang
2009 — conf
Model-Based Dimensioning of Multistage Processes Regarding Multiple Criteria.
DET
Berend Denkena, Helge Henning, Jan Henjes
2009 J jnl
Modelling and simulation of process: machine interaction in grinding.
Prod. Eng.
Jan C. Aurich, Dirk Biermann, Heribert Blum, Christian Brecher, Carsten Carstensen, Berend Denkena, Fritz Klocke, Matthias Kröger, Paul Steinmann, Klaus Weinert
2009 J jnl
Rule-based quotation costing of pressure die casting moulds.
Prod. Eng.
Berend Denkena, Leif-Erik Lorenzen, Jan Thomas Schürmeyer
2008 J jnl
Computer-aided analysis of flow-characteristics of a micro-positioning system.
Prod. Eng.
Berend Denkena, S. Simon
2008 J jnl
Design of dynamic multi sensor systems.
Prod. Eng.
Berend Denkena, Hans-Christian Möhring, K. M. Litwinski
2008 J jnl
Machining induced residual stress in structural aluminum parts.
Prod. Eng.
Berend Denkena, David Boehnke, L. de León
2008 J jnl
Microstructuring of functional surfaces by means of cutting processes.
Prod. Eng.
Berend Denkena, David Boehnke, Jan Kästner
2008 J jnl
Reduction of wear induced surface zone effects during hard turning by means of new tool geometries.
Prod. Eng.
Berend Denkena, David Boehnke, Roland Meyer
2008 J jnl
Sonic analysis in cut-off grinding of concrete.
Prod. Eng.
Berend Denkena, David Boehnke, Benjamin Konopatzki, Josef-Christian Buhl, Sameh Rahman, Lars Robben
2008 J jnl
Tool behavior at alternating thermo-mechanical loads during milling of compounds out of aluminum and spheroidal cast iron.
Prod. Eng.
Berend Denkena, David Boehnke, P. Dziewiecki
2007 J jnl
Dressing of filigree fine-grained metal bonded grinding wheels.
Prod. Eng.
Berend Denkena, Martin Reichstein, Dennis Hahmann
2007 J jnl
Experimental investigation and simulation of machining thin-walled workpieces.
Prod. Eng.
Berend Denkena, Carsten Schmidt
2007 J jnl
Mechanical information storage by use of an excited turning tool.
Prod. Eng.
Berend Denkena, Jörn Ostermann, Christian Becker, Christian Spille
2007 — conf
Schlüsselkomponenten für Roboter in der Produktion Roboterhaut und Sicherheitskonzept für die Mensch-Roboter Kooperation.
AMS
Berend Denkena, P. Hesse, J. Friederichs, Armin Wedler
2007 — conf
Simulationsbasierte Multisensorsystemauslegung.
AMS
Berend Denkena, Hans-Christian Möhring, K. M. Litwinski
2006 — ch.
Integrated Process Planning and Production Control.
Multiagent Engineering
Leif-Erik Lorenzen, Peer-Oliver Woelk, Berend Denkena, Thorsten Scholz, Ingo J. Timm, Otthein Herzog
2006 J jnl
Model-based control of a hexapod with linear direct drives.
Int. J. Comput. Integr. Manuf.
Berend Denkena, Christian Holz, Houssem Abdellatif
2005 C conf
Combining manual haptic path planning of industrial robots with automatic path smoothing.
ICINCO
Heinz Wörn, Björn Hein, Detlef Mages, Berend Denkena, Rene Apitz, Pawel Kowalski, Niels Reimer
2005 J jnl
Tool breakage monitoring using motor current signals for machine tools with linear motors.
IEEE Trans. Ind. Electron.
Xiaoli Li, Ruxu Du, Berend Denkena, Joachim Imiela
2003 — conf
Mass Customized Shoe Lasts.
MCPC
Berend Denkena, Stephan Scherger, Martin Lünemann
2003 — conf
Multiagent-Based Process Planning and Scheduling in Context of Supply Chains.
HoloMAS
Berend Denkena, Michael Zwick, Peer-Oliver Woelk
2002 — conf
Process Planning and Scheduling with Multiagent Systems.
BASYS
Berend Denkena, Hans Kurt Tönshoff, Michael Zwick, Peer-Oliver Woelk