Alessandro Ruggiero

26 papers Journal 8Unranked 18
YearRankTypeTitle / Venue / Authors
2025 — conf
A Straightforward IMU-Based Upper Limb Inverse Kinematics Compared with Open-Source Vision Algorithms.
BATS
Giuseppe Longo, Alessandro Sicilia, Emanuele Bergamo, Walter Zigliotto, Giorgio Barzon, Alfredo Rubino, Alessandro Ruggiero, Rosalba Liguori
2023 — conf
Characterization of green materials for automotive acoustic comfort.
MetroAutomotive
Claudio Guarnaccia, Alessandro Ruggiero, Domenico Russo, Matteo Ferro, Salvatore Dello Iacono, Petr Valásek
2023 — conf
Frequency analysis for the measurement of environmental noise.
MetroAutomotive
Maria Lamberti, Consolatina Liguori, Alessandro Ruggiero, Domenico Russo, Paolo Sommella
2023 — conf
Measurement and evaluation of vibration exposure in automotive workplace.
MetroAutomotive
Paolo Caruso, Matteo Ferro, Vincenzo Paciello, Alessandro Ruggiero, Domenico Russo
2022 — conf
Acoustic Monitoring of Environmental Noise Based on Sampling Approach.
M&N
Consolatina Liguori, Vincenzo Paciello, Alessandro Ruggiero, Domenico Russo, Paolo Sommella, Giuseppe Di Leo
2020 J jnl
Accurate Measurement of Reciprocating Kinetic Friction Coefficient Through Automatic Detection of the Running-In.
IEEE Trans. Instrum. Meas.
Alessandro Ruggiero, Giuseppe Di Leo, Consolatina Liguori, Domenico Russo, Paolo Sommella
2020 — conf
Ergonomics in surgical environments.
TEEM
Jaime Solleiro Rodriguez, Juan Antonio Juanes Méndez, Fernando Blaya Haro, Roberto D'Amato, Alessandro Ruggiero, José Antonio Rodríguez Montes
2019 — conf
A Finite Element Model for the Analysis of Squeaking Hips.
TEEM
Alessandro Ruggiero, Roberto D'Amato, Fernando Blaya Haro
2019 J jnl
A Statistical Approach for Improving the Accuracy of Dry Friction Coefficient Measurement.
IEEE Trans. Instrum. Meas.
Consolatina Liguori, Alessandro Ruggiero, Domenico Russo, Paolo Sommella
2019 — conf
Accurate measurement of Kinetic Friction Coefficient by using two types of tribometer.
I2MTC
Giuseppe Di Leo, Consolatina Liguori, Alessandro Ruggiero, Domenico Russo, Paolo Sommella
2019 — conf
Design and prototype of a control for virtual environment in CHD examination.
TEEM
Roberto D'Amato, Fernando Blaya Haro, D'emilton Alcântara, Juan A. Juanes, Alessandro Ruggiero
2019 J jnl
Evaluation of the Applicability of 3d Models as Perceived by the Students of Health Sciences.
J. Medical Syst.
Maria Teresa Ugidos Lozano, Fernando Blaya Haro, Alessandro Ruggiero, Sadia Manzoor, Juan Antonio Juanes Méndez
2019 J jnl
Experimental Comparison on Dental BioTribological Pairs Zirconia/Zirconia and Zirconia/Natural Tooth by Using a Reciprocating Tribometer.
J. Medical Syst.
Alessandro Ruggiero, Roberto D'Amato, Ludovico Sbordone, Fernando Blaya Haro, Antonio Lanza
2019 — conf
Preliminary Investigating on the Influence of Whitening on Natural Tooth Wear Resistance.
TEEM
Alessandro Ruggiero, Roberto D'Amato, Ludovico Sbordone, Fernando Blaya Haro, Emilio Cataldo, Antonio Lanza
2018 — conf
A study evaluating the level of satisfaction of the students of health sciences about the use of 3D printed bone models.
TEEM
Maria Teresa Ugidos Lozano, Roberto D'Amato, Alessandro Ruggiero, Sadia Manzoor, Fernando Blaya Haro, Juan Antonio Juanes Méndez
2018 J jnl
Accurate Estimation of the Environmental Noise Through Sampling Approach: Selection of the Measurement Time.
IEEE Trans. Instrum. Meas.
Consolatina Liguori, Alessandro Ruggiero, Domenico Russo, Paolo Sommella
2018 — conf
Accurate measurement of dry friction coefficient using reciprocating tribometer.
I2MTC
Consolatina Liguori, Alessandro Ruggiero, Domenico Russo, Paolo Sommella
2018 J jnl
Different Digitalization Techniques for 3D Printing of Anatomical Pieces.
J. Medical Syst.
Maria Teresa Ugidos Lozano, Fernando Blaya Haro, Alessandro Ruggiero, Sadia Manzoor, S. Nuere Menendez-Pidal, Juan Antonio Juanes Méndez
2018 — conf
On the Dental BioTribology: Comparison of Zirconia/Zirconia and Zirconia/Natural Tooth Friction Coefficients by Using a Reciprocating Tribometer.
TEEM
Alessandro Ruggiero, Roberto D'Amato, Ludovico Sbordone, Fernando Blaya Haro, Antonio Lanza
2018 — conf
Task-based measurements for estimating the workers' exposure to acoustic noise.
I2MTC
Consolatina Liguori, Alessandro Ruggiero, Domenico Russo, Paolo Sommella
2017 J jnl
Choosing Bootstrap Method for the Estimation of the Uncertainty of Traffic Noise Measurements.
IEEE Trans. Instrum. Meas.
Consolatina Liguori, Alessandro Ruggiero, Paolo Sommella, Domenico Russo
2017 — conf
Influence of measurement time on acoustic noise uncertainty.
I2MTC
Consolatina Liguori, Alessandro Ruggiero, Domenico Russo, Paolo Sommella
2017 — conf
Systems of digitalization and processing of anatomical pieces for their three-dimensional reconstruction.
TEEM
Maria Teresa Ugidos Lozano, Fernando Blaya Haro, Alessandro Ruggiero, Juan A. Juanes Méndez
2016 — conf
A preliminary study on the estimation of the uncertainty of traffic noise measurements.
I2MTC
Consolatina Liguori, Alfredo Paolillo, Alessandro Ruggiero, Domenico Russo
2016 J jnl
Outlier Detection for the Evaluation of the Measurement Uncertainty of Environmental Acoustic Noise.
IEEE Trans. Instrum. Meas.
Consolatina Liguori, Alfredo Paolillo, Alessandro Ruggiero, Domenico Russo
2015 — conf
Towards the evaluation of the measurement uncertainty of environmental acoustic noise.
I2MTC
Consolatina Liguori, Alfredo Paolillo, Alessandro Ruggiero, Domenico Russo