Alberto Tessarolo

29 papers C 6Journal 12Unranked 11
YearRankTypeTitle / Venue / Authors
2024 J jnl
A General Approach to the Design of Multi-Layer Fractional-Slot Concentrated Windings With Arbitrary Number of Slots, Poles, and Phases.
IEEE Access
Cesare Ciriani, Hamid Ali Khan, Kirols Mansour, Matteo Olivo, Alberto Tessarolo
2024 J jnl
Simple and Accurate Computation of Rotor Eddy-Current Losses in Surface-Mounted Permanent Magnet Machines Accounting for Magnet Circumferential Segmentation.
IEEE Access
Cesare Ciriani, Hamid Ali Khan, Kirols Mansour, Matteo Olivo, Alberto Tessarolo
2022 J jnl
Stator Current Spectral Content of Inverter-Fed Cage Rotor Induction Motor.
IEEE Access
Gojko Joksimovic, Peter Zajec, Alberto Tessarolo, Vanja Ambrozic, Andraz Rihar
2020 J jnl
Design, Prototyping and Testing of a Rotating Electrical Machine With Linear Geometry for Shipboard Applications.
IEEE Access
Mario Mezzarobba, Alberto Tessarolo, Nicola Barbini, Simone Castellan, Barbara Codan, Martina Terconi, Claudio Bruzzese, Augusto Fusari
2020 J jnl
Optimal Selection of Rotor Bar Number for Minimizing Torque and Current Pulsations Due to Rotor Slot Harmonics in Three-Phase Cage Induction Motors.
IEEE Access
Gojko Joksimovic, Emil Levi, Aldin Kajevic, Mario Mezzarobba, Alberto Tessarolo
2020 J jnl
Optimal Selection of Rotor Bar Number in Multiphase Cage Induction Motors.
IEEE Access
Gojko Joksimovic, Mario Mezzarobba, Alberto Tessarolo, Emil Levi
2019 J jnl
Enhanced Power Sharing Transient With Droop Controllers for Multithree-Phase Synchronous Electrical Machines.
IEEE Trans. Ind. Electron.
Alessandro Galassini, Alessandro Costabeber, Michele Degano, Chris Gerada, Alberto Tessarolo, Roberto Menis
2019 J jnl
Excitation System Technologies for Wound-Field Synchronous Machines: Survey of Solutions and Evolving Trends.
IEEE Access
Jonas Kristiansen Nøland, Stefano Nuzzo, Alberto Tessarolo, Erick Fernando Alves
2018 — conf
FEA-assisted steady-state modelling of a spoke type IPM machine with enhanced flux weakening capability.
EVER
Nada Elloumi, Ahmed Masmoudi, Mauro Bortolozzi, Alberto Tessarolo
2018 — conf
MEC-based prediction of the air gap flux density distribution of spoke-type IPM machines.
EVER
Nada Elloumi, Ahmed Masmoudi, Mauro Bortolozzi, Alberto Tessarolo
2017 — conf
5-Phase PM brushless DC motor current optimization - Part I: Modelization and analytical solution for a healthy drive.
EUROCON
Nicola Barbini, Alberto Tessarolo, Giuseppe Buja
2017 — conf
5-Phase PM brushless DC motor current optimization - Part II: Modelization and numerical solution for a healthy or faulty drive.
EUROCON
Nicola Barbini, Alberto Tessarolo, Giuseppe Buja
2017 C conf
Speed control with load sharing capabilities for multi-three phase synchronous motors.
IECON
Alessandro Galassini, Alessandro Costabeber, Chris Gerada, Alberto Tessarolo, Roberto Menis
2016 C conf
Improved four-layer winding design for a 12-slot 10-pole permanent magnet machine using unequal tooth coils.
IECON
Alberto Tessarolo, Mario Mezzarobba, Nicola Barbini
2016 C conf
Investigation into electrical resonance phenomena in the field circuit of wound-rotor synchronous machines.
IECON
Alberto Tessarolo, Edi Ciceran, Fabio Luise
2015 J jnl
Computationally Efficient Thermal Analysis of a Low-Speed High-Thrust Linear Electric Actuator With a Three-Dimensional Thermal Network Approach.
IEEE Trans. Ind. Electron.
Alberto Tessarolo, Claudio Bruzzese
2015 — conf
Multiphase electrical machines and drives in the transportation electrification.
RTSI
Radu Bojoi, Andrea Cavagnino, Alberto Tenconi, Alberto Tessarolo, Silvio Vaschetto
2015 — conf
Stator inductance matrix diagonalization algorithms for different multi-phase winding schemes of round-rotor electric machines part I. theory.
EUROCON
Alberto Tessarolo, Lorenzo Branz, Mauro Bortolozzi
2015 — conf
Stator inductance matrix diagonalization algorithms for different multi-phase winding schemes of round-rotor electric machines part II. Examples and validations.
EUROCON
Alberto Tessarolo, Lorenzo Branz, Mauro Bortolozzi
2014 C conf
A finite reluctance approach to electrical machine modeling and simulation: Magnetic network-based field solutions in MatLab environment.
IECON
Claudio Bruzzese, Damiano Zito, Ezio Santini, Alberto Tessarolo
2014 C conf
Analytical modeling of split-phase synchronous reluctance machines.
IECON
Alberto Tessarolo, Claudio Bruzzese, Michele Degano, Lorenzo Branz
2013 J jnl
Investigation Into the High-Frequency Limits and Performance of Load Commutated Inverters for High-Speed Synchronous Motor Drives.
IEEE Trans. Ind. Electron.
Alberto Tessarolo, Cristina Bassi, Giancarlo Ferrari, Davide Giulivo, Riccardo Macuglia, Roberto Menis
2013 — conf
Modeling of split-phase machines in Park's coordinates. Part I: Theoretical foundations.
EUROCON
Alberto Tessarolo, Mauro Bortolozzi, Alfredo Contin
2013 — conf
Modeling of split-phase machines in Park's coordinates. Part II: Equivalent circuit representation.
EUROCON
Alberto Tessarolo, Mauro Bortolozzi, Alfredo Contin
2012 J jnl
Time-Stepping Finite-Element Analysis of a 14-MVA Salient-Pole Shipboard Alternator for Different Damper Winding Design Solutions.
IEEE Trans. Ind. Electron.
Alberto Tessarolo, Cristina Bassi, Davide Giulivo
2011 — conf
On the computation of rotor losses through a set of harmonic finite element analyses in fractional-slot concentrated-coil permanent-magnet machines.
EUROCON
Alberto Tessarolo, Mario Mezzarobba
2011 — conf
Performance of a high-power induction motor supplied by two in-phase voltage-source inverters.
EUROCON
Alberto Tessarolo, Cristina Bassi, Davide Giulivo
2010 J jnl
On the Modeling of Commutation Transients in Split-Phase Synchronous Motors Supplied by Multiple Load-Commutated Inverters.
IEEE Trans. Ind. Electron.
Alberto Tessarolo, Simone Castellan, Roberto Menis, Giancarlo Ferrari
2008 C conf
An Analytical-Numeric Method for Stator End-Coil Leakage Inductance Computation in Multi-Phase Electric Machines.
IAS
Alberto Tessarolo, Fabio Luise